calling rotiform in the morning...

and yes, im rolling fenders/stretching/cambering.

dislikers are gonna dislike tho...

Picked up a set of vette "sawblades" for $50...

Anyone think they'll fit?

They'll look great if I can "stance" it properly.

Any suggestions on suspension options?
DIY front coilovers?

it turned out to have nothing to do with the ignition at all , but it threw a set of AP103's cause its been about 90* for the past week.

I blew the blower gasket = HUGE VACUUM LEAK!!!!

When i try and power brake to get a little extra jump and shoot a gap in traffic from a stoplight i put my ebrake on and then take it off but hold it down with my foot so the rear brakes are locked but my front tires are still free to spin. when the e brake is all the way in the rear tires seem to ...

My car is missing on ALL cyl's

happened while was was driving, and it "all of the sudden" started missing... BAD! sounds like a motor with jumped timing...

I shut it off, and now I've gotta press the gas, to make it start, and it now won't hold an idle to save its life...

My initial thoughts ...

I was talking wire tucks, firewall smoothing.

Anyone done it?

if its junk though, its "recycling"

god, i love you guys...

I like it...

i've been scouring the earth for a "junk" G8 hood to cut to pieces for a scoop donor...

cant take the filler neck off?

I'm gonna check mine out...

I might be able to think of a solution to the Ponti'rot curse

I like the way looks. +1 on a 1'' drop

no replacement for displacement

http://www.3800stroked.com/
http://www.comeracing.com/products/rodscranks/holdenv6/

think its possible to use a set of rear handles on the front doors and ditch the keyhole?

any pics of the results?

mine is starting to show signs of the same thing.

I was going to mask off the tank filler neck, strip is all down to bare metal (air craft stripper)
I was going to POR-15 the entire area...

http://www.por15.com/FLOOR-PAN-TRUNK-KI ... nfo/FPTRK/

http://www.chrfab.com/

better have some money...

this would look crazy sticking sideways out of the hood..

rear mount turbo... FMU... MegaSquirt(?)

the ARC intakes ARE well insulated... I own one...

I'm gonna just run a couple of nice mandrel's down to the foglight...

gut the foglight housing, hole saw the exterior lens, reassemble...

figure out what to do with the other foglight later...

I like the "harmonics" LOL ** I'm a ricer at heart**