So my car started giving me the signs of a bad motor/tranny mount. I had my wife video the motor moving around and it moves a good 5-6 inches.
I replaced it with a solid mount. Using nuts and bolts and a 5 inch hourglass boat roller.

http://i799.photobucket.com/albums/yy271/RJW50312/Mobile ...

Seats out and standing water

Water on the seat

Puddle on pass. rear floorboard

UPDATE:

After a hard rain saturday morning, I had about an inch of standing water on the rear pass. floor and water one the console, passenger seat, passenger seat. It was still raining when I checked it and I saw water dripping from right about the middle side of the sunroof. Sunday I checked and ...

Remove the plastic cover from each of the front wheel wells. It is at the back of the wheel well and runs from the fender inside a few inches. It takes 3 minutes to remove each one. Behind it is the outlet for the sunroof drains. You will see the rubber sunroof drain is visible ends in a nipple ...

Basically you use the vent position on the switch to adjust the angle of the glass to be how you want it when it is closed. Next, remove the motor from the assembly, and move the switch through all the positions, and then back to the closed position. Insert the motor back into the assembly and ...

The sunroof seal isn't made to be water tight. It has a water channel inside the assembly to let the water drain out. If the glass needs to be adjusted higher than it will go, you will need to calibrate the motor, which requires dropping the rear of the headliner.

The headliner is out. how do you ...

I have an 03 SSEi with a sunroof. I had the problem with water on the floor. Mainly the rear passenger floor. There was black mold or mildew so i pulled the carpet, cleaned the floor of any rust and debris. Rust was very minimal, only where the seats mounted. I bought replacement carpet from ...

I have an 03 ssei. the moonroof is leaking again. I have already done the drain fix and they are still draining just fine. My problem seems to be something worse. I am getting water kinda all over. I get it on the passenger and drivers seat, the console and the floor mats. I have checked with a hose ...

[img]I recently replaced both front struts and went with the KYB's. I bought Duralast brand strut mounts. It has been 4 weeks and both of them have been replaced with the upgraded KYB mounts. I will try to post pictures but the center of the mount just rips out of the mount and the strut shaft ...

TRY A HEAT GUN AND A PLASTIC SCRAPER. I WORKED AT A DEALERSHIP AND THATS WHAT WE USED

YEAH BUT YOUR A 6 HOUR DRIVE FROM ME!! I WAS JUST THINKING THIS WAY BECAUSE I REALLY DO SUCK AT SOLDERING. AND I WOULD KNOW THAT EVERYTHING SHOULD WORK THEN. AND THE ONLY PROBLEMS WOULD BE THE SWITCH. I JUST ORDERED A SET FROM AMAZON FOR BOTH SEATS BUTT AND BACK. WILL POST IF I CAN MAKE IT WORK ...

Ok so i know there are many write ups on how to resolder the heated seat element. The broken wire fix. i suck at soldering. so my question is, what if i bought the universal heated seat pad that are meant for those without factory heated seats. they seem to operate the same as ours. they have a high ...

thats really sweet ride man!

I JUST READ THE WHOLE BUILD. AWESOME WORK MY FRIEND. THATS MOTIVATION FOR ME. I WANT TO DO ROCKERS AND EXHAUST NEXT.

REALLY AN AMAZING JOB! HOW DID YOU GET THE CARPET SO CLEAN?

http://i799.photobucket.com/albums/yy271/RJW50312/48099E35-191E-4730-AE1A-FBFF7F78B59B_zpsfeqdfsr4.jpg

http://i799.photobucket.com/albums/yy271/RJW50312/2003%20BONNEVILLE%20SSEi/28DE8FE6-AB2A-4C62-BE33-2C3C68D6CC6A_zpsdxpkci2t.jpg

http://i799.photobucket.com/albums/yy271/RJW50312/2003 ...

Hows it going. Nice find on the Bonneville sounds pretty sweet. I have an 03 with double the mileage. I did the performance kit from intense-racing.com. I have not one regret. It really woke this car up. The sound the supercharger makes is just awesome. Plan on doing the heads next after taxes ...