Vacuum line elbows and t connector for 1995?

Series I L27 (1992-1994 SE,SLE, SSE) & Series II L36 (1995-1999 SE, SSE, SLE) and common problems for the Series I and II L67 (all supercharged models 92-99) Including Olds 88's, Olds LSS's, Olds 98 91-96, Buick Lesabres and Park Avenue 91-96. Please use General Chat for non-mechanical issues, and Performance and Brainstorming for improvements.
Post Reply
Twystedhemp2
SLE Member
SLE Member
Posts: 39
Joined: Fri Mar 09, 2018 8:31 pm
Year and Trim: 1995

Vacuum line elbows and t connector for 1995?

Post by Twystedhemp2 »

Where can I find these connectors? The 90° elbow into the throttle body, the T-connector into throttle body that goes to FPR and the smaller 90° going into the FPR, and the large connector from the booster into the back of the engine.
User avatar
95naSTA
Certified Bonneville Nut
Certified Bonneville Nut
Posts: 7087
Joined: Wed May 21, 2008 11:47 pm
Year and Trim: 95 SLE
Location: Philadelphia
Contact:

Re: Vacuum line elbows and t connector for 1995?

Post by 95naSTA »

The T connectors are on ebay for ~$7

p/n 24502852

I can't find the other one new.
Image
95 SLE... a keeper. 241k miles. Low and Slow.
97 BMW 528i
98 Infiniti vq35'd i30: 13.3@104mph, 30MPG Hwy (RIP)
02 Jag X-type
03 BMW M5
05 Chevy Cobalt LS
07 Infiniti G35s 6MT (Sold)
07 Ducati Monster S2R 800 with DS1000 swap
83 Yamaha IT175K
72 Yamaha DS7: '74 RD250 swap, JL chambers

Info on dropping a 92-99: Here.
Twystedhemp2
SLE Member
SLE Member
Posts: 39
Joined: Fri Mar 09, 2018 8:31 pm
Year and Trim: 1995

Re: Vacuum line elbows and t connector for 1995?

Post by Twystedhemp2 »

Thank you!!
ron350
Posts like an LN3
Posts like an LN3
Posts: 459
Joined: Mon May 26, 2008 10:28 am
Year and Trim: 1996 Regal Custom

Re: Vacuum line elbows and t connector for 1995?

Post by ron350 »

95naSTA thanks for posting the part # for the rubber throttle body T GM 24502852 just ordered one off ebay $6.11.

In the past I was ordering the complete assembly # 24506302 over $20.

Twysted did you find the part # for the fuel pressure regulator elbow?
User avatar
95naSTA
Certified Bonneville Nut
Certified Bonneville Nut
Posts: 7087
Joined: Wed May 21, 2008 11:47 pm
Year and Trim: 95 SLE
Location: Philadelphia
Contact:

Re: Vacuum line elbows and t connector for 1995?

Post by 95naSTA »

No problem guys.

For the FPR, one of the fittings in this kit should work. Advance Auto has them for $6 locally by me.
https://www.dormanproducts.com/p-26177-47431.aspx
Image
95 SLE... a keeper. 241k miles. Low and Slow.
97 BMW 528i
98 Infiniti vq35'd i30: 13.3@104mph, 30MPG Hwy (RIP)
02 Jag X-type
03 BMW M5
05 Chevy Cobalt LS
07 Infiniti G35s 6MT (Sold)
07 Ducati Monster S2R 800 with DS1000 swap
83 Yamaha IT175K
72 Yamaha DS7: '74 RD250 swap, JL chambers

Info on dropping a 92-99: Here.
Twystedhemp2
SLE Member
SLE Member
Posts: 39
Joined: Fri Mar 09, 2018 8:31 pm
Year and Trim: 1995

Re: Vacuum line elbows and t connector for 1995?

Post by Twystedhemp2 »

Ah, I think that is the set I got from a parts store last time. The second one in the picture worked well but it cracked right at the bend again.
ron350
Posts like an LN3
Posts like an LN3
Posts: 459
Joined: Mon May 26, 2008 10:28 am
Year and Trim: 1996 Regal Custom

Re: Vacuum line elbows and t connector for 1995?

Post by ron350 »

Thanks the vacuum T from ebay looks good and fits.
Post Reply