cable for cp9110 edit: made the cable now some questions
-
tpulliam79
- Posts like an L27
- Posts: 797
- Joined: Thu May 22, 2008 1:29 am
- Year and Trim: 1991 SSE+I. 1994 ssei
- Location: Spokane, WA WCBF '08 survivor
cable for cp9110 edit: made the cable now some questions
So my 94 ssei obviously has the weird OBD 1.5 system I ordered a scanner that will work but need to find someone that can make the cord that I need. I have tried to contact Slug and I know he used to make them but have gotten no response. Does anyone know where I can find one?
Last edited by tpulliam79 on Mon May 05, 2014 10:20 pm, edited 2 times in total.
-
SuperHbody
- SSEi Member
- Posts: 156
- Joined: Thu Oct 31, 2013 9:59 pm
- Year and Trim: 1988 LE
- Location: Eugene, Oregon
Re: cable for action cp9145
Try aldlcable.com, they have specially made cables for 12 pin OBD 1 and 16 pin OBD 1.
-
tpulliam79
- Posts like an L27
- Posts: 797
- Joined: Thu May 22, 2008 1:29 am
- Year and Trim: 1991 SSE+I. 1994 ssei
- Location: Spokane, WA WCBF '08 survivor
Re: cable for action cp9110
okay so my 9110 scanner is here but I need to know which cable I need to buy so I can try to modify it to work. I also have the actRon 9145 scanner which works for everything except kr from what I can tell. I don't want to destroy the cable I have for the 9 145 so I need to know if anyone has an old Cable they don't use anymore or which part number I am looking for when ordering the cable. Thanks for the help here just trying to get her dialed in
-
tpulliam79
- Posts like an L27
- Posts: 797
- Joined: Thu May 22, 2008 1:29 am
- Year and Trim: 1991 SSE+I. 1994 ssei
- Location: Spokane, WA WCBF '08 survivor
Re: cable for cp9110 edit: made the cable now some question
So i think i rewired the cable correctly, I am able to read and record data but is still showing 0 kr just as my 9145 scanner did. took on a few wot runs still 0 kr? if the scanner is working then it must be wired correctly right? the engine itself has less than 30000 miles on it and car has 130 is it possible to just be kr free at all times or should i see a little from time to time? I want to pulley down but need to be sure the kr readings are correct. are there certain conditions that may make it appear?
-
RJolly87
- Certified Bonneville Nut
- Posts: 5403
- Joined: Tue May 27, 2008 8:53 am
- Year and Trim: 1993 Buick Park Avenue
1994 Buick Regal Custom - Location: Las Cruces, NM
Re: cable for cp9110 edit: made the cable now some question
I wonder if you can induce false knock just to ease your concerns? Tapping the block with something metal while running comes to mind.
~Randall~
1993 Buick Park Avenue - 197k - Some odds and ends done - Simply won't die
1994 Buick Regal - 78k - Bone stock - Always ready for a good kicking
1990 Oldsmobile 88 - Gone to a better place
1993 Buick Park Avenue - 197k - Some odds and ends done - Simply won't die
1994 Buick Regal - 78k - Bone stock - Always ready for a good kicking
1990 Oldsmobile 88 - Gone to a better place
-
RJolly87
- Certified Bonneville Nut
- Posts: 5403
- Joined: Tue May 27, 2008 8:53 am
- Year and Trim: 1993 Buick Park Avenue
1994 Buick Regal Custom - Location: Las Cruces, NM
Re: cable for cp9110 edit: made the cable now some question
I would also confirm the knock sensors are actually reading knock too.
~Randall~
1993 Buick Park Avenue - 197k - Some odds and ends done - Simply won't die
1994 Buick Regal - 78k - Bone stock - Always ready for a good kicking
1990 Oldsmobile 88 - Gone to a better place
1993 Buick Park Avenue - 197k - Some odds and ends done - Simply won't die
1994 Buick Regal - 78k - Bone stock - Always ready for a good kicking
1990 Oldsmobile 88 - Gone to a better place