Anybody have experience with Wagner rotors?
-
LeSabre in Buffalo
- Certified Bonneville Nut

- Posts: 3177
- Joined: Fri May 23, 2008 1:15 am
- Year and Trim: 2012 Eco
- Location: Corning, NY
Anybody have experience with Wagner rotors?
Any experiences with Wagner rotors from Advance? I'm starting to get some shake when braking. It's not bad yet, but with my driving involving lots of hills, it's a matter of time before it gets worse. 60k on Ebay drilled/slotted rotors isn't too bad.
Or, are there other rotor brands I should be looking at?
Or, are there other rotor brands I should be looking at?
-
bonnevillain
- Retired Site Developer

- Posts: 3046
- Joined: Wed May 21, 2008 11:07 pm
- Year and Trim: 2002 SLE
- Location: Minnesota
Re: Anybody have experience with Wagner rotors?
When I first saw this title, i thought maybe I posted this last night and forgot about it. I will most likely buying Wagner rotors this week, I took a look at them and they look pretty good for the price. I'd be interested in hearing experiences as well.
- J Wikoff
- Administrator

- Posts: 17080
- Joined: Mon May 19, 2008 7:01 pm
- Year and Trim: 1992 SSE
2009 G8 GT - Location: Central Illinois
- Contact:
Re: Anybody have experience with Wagner rotors?
We got over 100,000 miles on a set on my wife's Grand Am. The replaced them VIA lifetime warrantee along with matching Wagner pads because of a slight shudder.

WHITE WHINE - 1992 SSE Supercharged 236.26 ci (.040 Over) 15.090 at 90.2 MPH on old engine w/ slipping trans & melted O2 sensor - Gen 3 M62 and matching TB, Gen 2 Pully, Zillamotorsports Ported LIM, YT 1.72 Roller Rockers, SII FPR & Injectors, Hypertech Thermomaster chip w/ 160 Thermo, TransGo Shift Kit, Infinity/Pioneer Speakers & a 10" Alpine Type R Sub, all the watts, 140 amp Alternator, Ricepipe CAI w/ heatshield, Pilot Angel Eye Foglights, Clear Corners, '02 17" Chrome Bent 5's, Magnaflow F-Body Muffler and Hi-flo Cat, Ceramic Coated Ported Exhaust Manifolds, Fan Override, Monroe Reflex struts, red calipers
2009 G8 GT - Sport Red Metallic, loaded, SOLO Axlebacks, Rotofab Intake, Tuned, autodim mirror, removed intake manifold cover, HSV GTS triple gauge pod, two tone red-hot shifter and HSV SuperSport steering wheel, GXP rear sway bar and diffuser, 3.45 diff and various Camaro suspension bits, LED Taillights
-
00Beast
- Retired Site Developer

- Posts: 20960
- Joined: Tue May 27, 2008 10:30 pm
- Year and Trim: '17 Silverado 1500
- Location: MN/IA
- Contact:
Re: Anybody have experience with Wagner rotors?
Wagner top-shelf, or NAPA Ultra Premium will be great. 
Bye Bye:

RIP sandrock

RIP sandrock
Sirius wrote:Think about it. You’re tooling down the road in your Prius, knowing full-well that this thing being green is as big a sham as federally mandated ethanol-enriched gas, Russia pulling out of Ukraine, and Obamacare.
Re: Anybody have experience with Wagner rotors?
I am sold on brakeperformance.com. I put a set of their dimpled/slotted rotors on my girlriends 05 dakota. She drives like a moron and is hard on brakes. Had the factory rotors warped at 30k. Now have 50k on the replacements and they are holding up just fine and no wobbles or vibrations. I cant attest to balancing because its a truck and i dont drive it over 90mph.
-
LeSabre in Buffalo
- Certified Bonneville Nut

- Posts: 3177
- Joined: Fri May 23, 2008 1:15 am
- Year and Trim: 2012 Eco
- Location: Corning, NY
Re: Anybody have experience with Wagner rotors?
I have a set of those cheap-o drilled/slotted rotors on there right now. I got mine to wobble with 60k miles on them. Some EBC slotted rotors for $60 more than what I paid for the cheap (relatively) drilled/slotted rotors are being shipped right now. I've heard good things about the EBC's.
-
LeSabre in Buffalo
- Certified Bonneville Nut

- Posts: 3177
- Joined: Fri May 23, 2008 1:15 am
- Year and Trim: 2012 Eco
- Location: Corning, NY
Re: Anybody have experience with Wagner rotors?
Got the EBC's on today, along with new ceramic pads and new rubber hoses. It stops very well now. There will be pictures of the EBC's compared to the previous drilled/slotted rotors. Here's a preview: The EBC's are MUCH thicker than the old rotors.
-
00Beast
- Retired Site Developer

- Posts: 20960
- Joined: Tue May 27, 2008 10:30 pm
- Year and Trim: '17 Silverado 1500
- Location: MN/IA
- Contact:
Re: Anybody have experience with Wagner rotors?
Yeah, the EBC's are great. Did AZ warranty the pads?
Bye Bye:

RIP sandrock

RIP sandrock
Sirius wrote:Think about it. You’re tooling down the road in your Prius, knowing full-well that this thing being green is as big a sham as federally mandated ethanol-enriched gas, Russia pulling out of Ukraine, and Obamacare.
-
LeSabre in Buffalo
- Certified Bonneville Nut

- Posts: 3177
- Joined: Fri May 23, 2008 1:15 am
- Year and Trim: 2012 Eco
- Location: Corning, NY
Re: Anybody have experience with Wagner rotors?
Yep, looked up the phone number. I walked in with the old pads in a plastic bag, left with the new pads in the same plastic bag!
-
LeSabre in Buffalo
- Certified Bonneville Nut

- Posts: 3177
- Joined: Fri May 23, 2008 1:15 am
- Year and Trim: 2012 Eco
- Location: Corning, NY
Re: Anybody have experience with Wagner rotors?
Pictures!
EBC rotor on left, generic drilled/slotted on right:

EBC is heavier, too.
EBC rotor on left, generic drilled/slotted on right:

EBC is heavier, too.
-
00Beast
- Retired Site Developer

- Posts: 20960
- Joined: Tue May 27, 2008 10:30 pm
- Year and Trim: '17 Silverado 1500
- Location: MN/IA
- Contact:
Re: Anybody have experience with Wagner rotors?
Ugh, heavy rotors suck sometimes. I think the rotors on the GXP weigh something like 15 pounds each. Heavy f*ckers...
Bye Bye:

RIP sandrock

RIP sandrock
Sirius wrote:Think about it. You’re tooling down the road in your Prius, knowing full-well that this thing being green is as big a sham as federally mandated ethanol-enriched gas, Russia pulling out of Ukraine, and Obamacare.



