carl, the gp wheels will fit over my calipers without spacers, right? because i had a problem with 15" lesabre steelies hitting my caliper so i just want to make sure they will fit without any modification and without spacers?

its a green car with a black hood lol

hey guys, i have a 94 bonneville se. Im looking at summer wheels and have it narrowed down to these two sets.
http://www.ebay.com/itm/16-Grand-Prix-Wheels-97-98-99-00-Factory-1997-2000-OEM-Rims-6527/281470048432?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc ...

Looking for a part number and or a website where i can buy the vacuum hose that comes off the throttle body right by where it meets the upper intake, has a big line and small line coming out of it. the small line loops around in a U shape and goes onto the fuel pressure regulator, the big line goes ...

Looking for a part number and or a website where i can buy the vacuum hose that comes off the throttle body right by where it meets the upper intake, has a big line and small line coming out of it. the small line loops around in a U shape and goes onto the fuel pressure regulator, the big line goes ...

I had pretty much the same issue on my 94se, had 15 lbs of pressure at idle, and would stumble greatly under acceleration but idle like it was perfect. Replaced the fuel pump along with the fuel filter, and its been running perfectly since then!

If i were to get l67 coils for my L27, what brand would be best? Id assume ACdelco, but im not sure. Id rather buy new than used, because you don't know when used ones will die.

Replaced a fuel pump and filter and part of a fuel line! and last week i did my UIM and LIM gaskets!

SOLVED. Car has a weak fuel pump, put gauge on it and its only giving out 15lbs of fuel when its running. Should be around 40 or 45lbs. Plugged fuel return hose to see if pressure shot up and it stayed right at 15lbs. Its not even pumping enough to get past regulator and piss out the return line.

Also, when the car starts up cold, it has an erratic idle. Fluctuates by a couple hundred rpm until car somewhat warms up, then it evens out.

Hey all, just took a trip from southwest CT over to charlestown RI. Developed a misfire about halfway on the trip there. It effects acceleration, and you can definitely tell its missing if you rev the engine from under the hood. If i try to accelerate and downshift from about 3k to 4.5k, itll reach ...

for the upper intake, delphi, acdelco, or dorman??

My upper intake leaks from the gasket where it meets the lower intake. only on cold start though, once it warms up and gaskets expand, it stops. But i wanna just tear it down and do the upper and lower gaskets.

Where can i find the parts/best brands for my 94 series I n/a? Upper intake/upper and lower gasket kit?

did my research and it does, haha sorry. Now where can i find the parts/best brands for my 94 series I n/a? Upper intake/upper and lower gasket kit?

Thanks harofreak! Thatll fit a 2000 park ave series II n/a?

And where would you guys recommend i buy my upper intake/upper gasket set/lower gasket set for my 94 se?

I see the apn upper intake kit for my moms 2000 park ave, which lower gaskets should i get?
There's 96-08 lower gasket set, with permadryplus. Or 97-05 lower gasket set without permadryplus. Or is there an aluminum lower gasket set that im missing and should buy?

yeah i cant find a lot of stuff haha, whats the best brand for the drilled slotted rotors and pads, and the stat?

What site has the most products for the series 1 NA? Im talking like 180 stats, drilled and slotted rotors, good brake pads to use with those rotors. I wanna do the stuff like that to my 94 but i dont know where to get any of it! After that it would be yella terra 1.8 rockers, but i dont have $450 ...