Page 1 of 1
websites
Posted: Tue Jul 29, 2014 12:23 am
by Datbonneville1
What site has the most products for the series 1 NA? Im talking like 180 stats, drilled and slotted rotors, good brake pads to use with those rotors. I wanna do the stuff like that to my 94 but i dont know where to get any of it! After that it would be yella terra 1.8 rockers, but i dont have $450 to spend at the moment haha
Re: websites
Posted: Tue Jul 29, 2014 5:56 am
by spoiledred94
Check out Intense racing. They have a good assortment of 3.8L pick me ups.
Re: websites
Posted: Tue Jul 29, 2014 4:18 pm
by gweg_b
The 180 t-stat you can get at any auto parts store (got all mine at Advance). For brakes and rotors you just have to get the right type/size, and Ebay is usually a good source for that if you're looking for slotted and/or cross drilled rotors. And Intense Racing is the only place I know that is still carrying the 1.8 YT rockers for the Series I.
I don't know about a custom cam, and if you're able to or know someone that can, you can do some porting of your intake ports. If you don't already you can make a custom CAI or FWI. I plan to use the hole where my evap can is on my LeSabre to put a K&N cone through and pipe it using the flexible tubing from Intense (once I get the car running again).
The Series I never had much of an aftermarket to begin with, and now that it's a 20+ year old engine, finding anything aftermarket is going to be slim.
Re: websites
Posted: Tue Jul 29, 2014 7:36 pm
by Datbonneville1
yeah i cant find a lot of stuff haha, whats the best brand for the drilled slotted rotors and pads, and the stat?
Re: websites
Posted: Wed Jul 30, 2014 5:01 pm
by gweg_b
The best t-stat would be an AC Delco, which you can get in 180. From what I've heard, Stoptech has good slotted and cross drilled rotors. And pads, I'm not sure about. Usually depending on what you want to spend. I'm not an expert on brake pads, but I do know ceramic pads are the lowest noise and dust, but cost more than metallic pads.