Rear shock replacments???
-
2001SSEi
- SLE Member

- Posts: 72
- Joined: Fri May 23, 2008 5:58 pm
- Year and Trim: 2001 SSEi
- Location: Indy
Rear shock replacments???
One of my rear shocks lost all of its oil? I am looking for repacements, what do you guys recommend? GM, Monroe Max air, or somthing else? Also should I replace the shock mounts at the same time? GM Of Moog?
Please let me know, and Thank you.
Mike
2001 SSEi 96000 Miles
Please let me know, and Thank you.
Mike
2001 SSEi 96000 Miles
Last edited by 2001SSEi on Sun Nov 02, 2008 3:33 pm, edited 3 times in total.
2001 SSEi 133,000, Intense FWI, ZZP SS Headers, S1X Cam, ZZP Aluminium Heads, 3.2 Intense, GenV, 180 Stat, 42#, WB O2 LC1, HP Tuner Pro, ZZP tranmission.
-
2001SSEi
- SLE Member

- Posts: 72
- Joined: Fri May 23, 2008 5:58 pm
- Year and Trim: 2001 SSEi
- Location: Indy
Re: Rear shock replacments???
I replaced them with Monroe air rides shocks, and I reused the original mounts for now. I will have to see how that goes... I know I will have to replace the fronts struts soon, But I need to wait until I find a job first! Are the front struts very difficult to replace, please share your experience with me? Do I need a spring compressor or any other special tool?
Mike
Mike
2001 SSEi 133,000, Intense FWI, ZZP SS Headers, S1X Cam, ZZP Aluminium Heads, 3.2 Intense, GenV, 180 Stat, 42#, WB O2 LC1, HP Tuner Pro, ZZP tranmission.
- Archon
- Resident Gearhead

- Posts: 8781
- Joined: Mon May 19, 2008 10:30 pm
- Year and Trim: 2014 Cadillac XTS Vsport.
- Location: Grand Rapids, Michigan
Re: Rear shock replacments???
If you aren't having issues, keeping the original shock mounts may not be a problem. Many of the after-market ones clunk over sharp bumps. The Moogs do seem to settle down some, after a while.
Yes, you will need a good set of spring compressors. A strut nut removal tool, like this one will help, also.
http://www.jcwhitney.com/Steering-Suspe ... _10101.jcw
A breaker bar will help with the strut to knuckle bolts, and a good torque wrench for getting things tightened properly.
Be extremely careful, if you decide to do the job yourself. The spring can be extremely dangerous if it lets loose from the spring compressors.
Yes, you will need a good set of spring compressors. A strut nut removal tool, like this one will help, also.
http://www.jcwhitney.com/Steering-Suspe ... _10101.jcw
A breaker bar will help with the strut to knuckle bolts, and a good torque wrench for getting things tightened properly.
Be extremely careful, if you decide to do the job yourself. The spring can be extremely dangerous if it lets loose from the spring compressors.
*Gone, but not forgotten* - Black 2000 SSEi, HIR Headlights, Angel Eyes fogs, 3rd brake light overlay, hi-flo cat, 180 degree thermostat, HS 1.9 rockers, LSx yellow springs, Intense FWI, PCM, shift kit, push rods, and 3.4 Pulley. ZZP Power Log.
-
2001SSEi
- SLE Member

- Posts: 72
- Joined: Fri May 23, 2008 5:58 pm
- Year and Trim: 2001 SSEi
- Location: Indy
Re: Rear shock replacments???
Thanks for the detailed reply on the tools...
One more question about the parts needed:
the strut, new springs, (bellows and bumper), new sping seats (upper and lower), and strut bearing. do I need to order any other parts for this assembly?
DO I really need new springs? Or can I reuse the old ones, just asking?
BTW, I was looking at: (Oreilly Auto Parts) http://www.oreillyauto.com/EW3/DisplayT ... wPage=true
Have a good one
Thank you!!
Mike J.
One more question about the parts needed:
the strut, new springs, (bellows and bumper), new sping seats (upper and lower), and strut bearing. do I need to order any other parts for this assembly?
DO I really need new springs? Or can I reuse the old ones, just asking?
BTW, I was looking at: (Oreilly Auto Parts) http://www.oreillyauto.com/EW3/DisplayT ... wPage=true
Have a good one
Thank you!!
Mike J.
2001 SSEi 133,000, Intense FWI, ZZP SS Headers, S1X Cam, ZZP Aluminium Heads, 3.2 Intense, GenV, 180 Stat, 42#, WB O2 LC1, HP Tuner Pro, ZZP tranmission.
- Archon
- Resident Gearhead

- Posts: 8781
- Joined: Mon May 19, 2008 10:30 pm
- Year and Trim: 2014 Cadillac XTS Vsport.
- Location: Grand Rapids, Michigan
Re: Rear shock replacments???
Unless the springs are damaged in some way, which would include places where the coating has come off, and they're rusting, there is no need to replace them. The bearing, and seats are a good idea.
*Gone, but not forgotten* - Black 2000 SSEi, HIR Headlights, Angel Eyes fogs, 3rd brake light overlay, hi-flo cat, 180 degree thermostat, HS 1.9 rockers, LSx yellow springs, Intense FWI, PCM, shift kit, push rods, and 3.4 Pulley. ZZP Power Log.
- olblueeyesbonne
- Retired Moderator

- Posts: 6146
- Joined: Wed May 21, 2008 9:44 pm
- Year and Trim: 99 SSEi
01 SLE
02 GTP40th
02 SSEi
06 GP GT - Location: Sauk Centre, MN
- Contact:
Re: Rear shock replacments???
I would skip Orielly's and go straight to the discount site www.rockauto.com and use the discount code that can be found in the 'VENDORS' forum.
Napa has Monroe Sensatrac air shocks for the rear for $85 (total for two) -my old 00 SLE just got them Thursday and the owner couldn't be happier. That's actually better than buying them from www.rockauto.com because at that price even a 10-15% discount will come back in shipping.
Napa has Monroe Sensatrac air shocks for the rear for $85 (total for two) -my old 00 SLE just got them Thursday and the owner couldn't be happier. That's actually better than buying them from www.rockauto.com because at that price even a 10-15% discount will come back in shipping.
DHP Powrtuner & Tech 2
1998 GTP Coupe
1999 SSEi 70k miles
2000 Silverado 2500 Ext Cab 4x4/6.0L/4L80E
2000 Trans Am WS6 LQ3 (LQ4 w/LS3 top end) 4L60E
2001 SLE
2002 Monte Carlo SS Top-swapped FSIC Gen V TOG's, Mezeire.....
2002 GTP 40th Anniv Ed Coupe
2004 GTP Comp G 'Bottom-swapped'
1998 GTP Coupe
1999 SSEi 70k miles
2000 Silverado 2500 Ext Cab 4x4/6.0L/4L80E
2000 Trans Am WS6 LQ3 (LQ4 w/LS3 top end) 4L60E
2001 SLE
2002 Monte Carlo SS Top-swapped FSIC Gen V TOG's, Mezeire.....
2002 GTP 40th Anniv Ed Coupe
2004 GTP Comp G 'Bottom-swapped'
Re: Rear shock replacments???
I need some rear shocks as well....Auto zone sells Gabriel Hi Jackers ,.......there $71 a pair..... no good?? whats good and fairly inexpensive yet not to cheap
thanks
thanks
-
RookieSSei
- SSE Member

- Posts: 134
- Joined: Fri Jun 27, 2008 10:59 am
- Year and Trim: 2002 SSEI
ALL STOCK (FOR noW)
Re: Rear shock replacments???
i got the monroe shocks and struts put on my car and I love it plus! my shake at 70+ is .... NO MORE !!!!
-
mrbear3800
- SE Member

- Posts: 19
- Joined: Wed Aug 06, 2008 9:07 pm
- Year and Trim: 2003 Buick Lesabre Custom
- Location: Buffalo, NY
Re: Rear shock replacments???
I put Monroe "Maxx" air struts on my mother's car when the originals started leaking oil this past summer. They are WAY too firm, IMO. I couldn't seem to find any other struts at the time..
2003 Buick Lesabre Custom (parents car)
1995 Mercury Grand Marquis (mine)
I don't currently own a GM product
1995 Mercury Grand Marquis (mine)
I don't currently own a GM product
Re: Rear shock replacments???
your right...i put monroe on the rear......and they do feel a bit firm....yet its alot better, no more of the whole rear bouncing and feeling like my tires are going to be pulled off the back from bouncing so hard left and right when i hit a bump....thats gone atleast
-
mrbear3800
- SE Member

- Posts: 19
- Joined: Wed Aug 06, 2008 9:07 pm
- Year and Trim: 2003 Buick Lesabre Custom
- Location: Buffalo, NY
Re: Rear shock replacments???
True. I'm going to be replacing the blown front struts soon so it should feel a bit more balanced. I'm suprised it doesn't have over-steer issues with the lame duck front struts and rock hard rear ones. Wonder if there is a way to adjust the firmness of the rear air shocks??kp8420 wrote:your right...i put monroe on the rear......and they do feel a bit firm....yet its alot better, no more of the whole rear bouncing and feeling like my tires are going to be pulled off the back from bouncing so hard left and right when i hit a bump....thats gone atleast
2003 Buick Lesabre Custom (parents car)
1995 Mercury Grand Marquis (mine)
I don't currently own a GM product
1995 Mercury Grand Marquis (mine)
I don't currently own a GM product

