Just bought a 2005 SLE last night.
The temperature gauge is not working.
Is it a bad stepper motor or maybe a sensor?
One more thing.
One of the fog lights is burned out.
On my 2000 SLE you just take out 2 bolts.
On this one it is boxed in.
Do you just drop the black panel that is held up with push pins?
Thanks.
2005 SLE Temp.Gauge Not Working
- RJolly87
- Certified Bonneville Nut

- Posts: 5403
- Joined: Tue May 27, 2008 8:53 am
- Year and Trim: 1993 Buick Park Avenue
1994 Buick Regal Custom - Location: Las Cruces, NM
Re: 2005 SLE Temp.Gauge Not Working
Does the gauge sweep with the rest of the gauges properly?
What exactly is the gauge doing otherwise?
Are you receiving any other symptoms, such as a MIL?
What exactly is the gauge doing otherwise?
Are you receiving any other symptoms, such as a MIL?
~Randall~


1993 Buick Park Avenue - 197k - Some odds and ends done - Simply won't die
1994 Buick Regal - 78k - Bone stock - Always ready for a good kicking
1990 Oldsmobile 88 - Gone to a better place


1993 Buick Park Avenue - 197k - Some odds and ends done - Simply won't die
1994 Buick Regal - 78k - Bone stock - Always ready for a good kicking
1990 Oldsmobile 88 - Gone to a better place
-
dougtoth
- Posts like an LN3

- Posts: 434
- Joined: Thu Mar 31, 2011 8:57 pm
- Year and Trim: 2005SLE CRIMSON
2005SLE PEARL
1975 MONTE CARLO - Location: MUSKEGO,WISCONSIN
Re: 2005 SLE Temp.Gauge Not Working
The needle just stays down on the low end (left side) and does not move.
There are some codes.
One was for the EGR Valve and the other is the P0442. (possibly bad gas cap)
My scanner is borrowed out but should have it back tomorrow.
I will let you know the codes tomorrow.
Thanks.
There are some codes.
One was for the EGR Valve and the other is the P0442. (possibly bad gas cap)
My scanner is borrowed out but should have it back tomorrow.
I will let you know the codes tomorrow.
Thanks.
-
Goostoff
- SLE Member

- Posts: 62
- Joined: Thu Sep 10, 2015 9:02 pm
- Year and Trim: 2000 SE. 2000 SSEi, 2001 SSEi, 2002 SLE
Re: 2005 SLE Temp.Gauge Not Working
GM instrument clusters are junk. Most likely a bad guage if it isnt sweeping when you start the car.
For the fog light just drop that panel and the fogs are right there. I actually burn out so many fog light bulbs that I left that panel off the car now and can change them in less than a minute
For the fog light just drop that panel and the fogs are right there. I actually burn out so many fog light bulbs that I left that panel off the car now and can change them in less than a minute
-
dougtoth
- Posts like an LN3

- Posts: 434
- Joined: Thu Mar 31, 2011 8:57 pm
- Year and Trim: 2005SLE CRIMSON
2005SLE PEARL
1975 MONTE CARLO - Location: MUSKEGO,WISCONSIN
Re: 2005 SLE Temp.Gauge Not Working
Thanks for the information.
- nos4blood70
- Certified Bonneville Nut

- Posts: 9522
- Joined: Mon May 10, 2010 6:11 pm
- Year and Trim: 2003 SLE
- Location: Chicago, IL
Re: 2005 SLE Temp.Gauge Not Working
Sounds like a bad stepper motor. The 2004 and newer clusters are known for issues with the steppers.
The fog lights on the GXP/2005 SLE style cars are known to go out frequently. Replace with LED or HID to keep them going longer.
The fog lights on the GXP/2005 SLE style cars are known to go out frequently. Replace with LED or HID to keep them going longer.
-
dougtoth
- Posts like an LN3

- Posts: 434
- Joined: Thu Mar 31, 2011 8:57 pm
- Year and Trim: 2005SLE CRIMSON
2005SLE PEARL
1975 MONTE CARLO - Location: MUSKEGO,WISCONSIN
Re: 2005 SLE Temp.Gauge Not Working
Do you know what the LED bulb number is?
Is it just plug and play?
Thanks.
Is it just plug and play?
Thanks.


