1995 pontiac bonneville se ICM change

Series I L27 (1992-1994 SE,SLE, SSE) & Series II L36 (1995-1999 SE, SSE, SLE) and common problems for the Series I and II L67 (all supercharged models 92-99) Including Olds 88's, Olds LSS's, Olds 98 91-96, Buick Lesabres and Park Avenue 91-96. Please use General Chat for non-mechanical issues, and Performance and Brainstorming for improvements.
Post Reply
614justin
SSE Member
SSE Member
Posts: 123
Joined: Mon Aug 01, 2016 10:19 am
Year and Trim: 1995 bonneville se L36

1995 pontiac bonneville se ICM change

Post by 614justin »

How do replace an ICM on 95 L36?
Do i just remove ignition coils?
Do i need di electric grease?
Top
User avatar
J Wikoff
Administrator
Administrator
Posts: 17080
Joined: Mon May 19, 2008 7:01 pm
Year and Trim: 1992 SSE
2009 G8 GT
Location: Central Illinois
Contact:
Contact J Wikoff

Re: 1995 pontiac bonneville se ICM change

Post by J Wikoff »

Yeah, remove the coils, and the screw in the middle of the wires on the harness that holds it on. Some dielectric grease on the contacts won't hurt.
Image
WHITE WHINE - 1992 SSE Supercharged 236.26 ci (.040 Over) 15.090 at 90.2 MPH on old engine w/ slipping trans & melted O2 sensor - Gen 3 M62 and matching TB, Gen 2 Pully, Zillamotorsports Ported LIM, YT 1.72 Roller Rockers, SII FPR & Injectors, Hypertech Thermomaster chip w/ 160 Thermo, TransGo Shift Kit, Infinity/Pioneer Speakers & a 10" Alpine Type R Sub, all the watts, 140 amp Alternator, Ricepipe CAI w/ heatshield, Pilot Angel Eye Foglights, Clear Corners, '02 17" Chrome Bent 5's, Magnaflow F-Body Muffler and Hi-flo Cat, Ceramic Coated Ported Exhaust Manifolds, Fan Override, Monroe Reflex struts, red calipers
2009 G8 GT - Sport Red Metallic, loaded, SOLO Axlebacks, Rotofab Intake, Tuned, autodim mirror, removed intake manifold cover, HSV GTS triple gauge pod, two tone red-hot shifter and HSV SuperSport steering wheel, GXP rear sway bar and diffuser, 3.45 diff and various Camaro suspension bits, LED Taillights
Top
User avatar
Wes
Posts like a Northstar
Posts like a Northstar
Posts: 2363
Joined: Thu May 22, 2008 8:09 pm
Year and Trim: 2002 Buick Park Ave
Location: Michigan

Re: 1995 pontiac bonneville se ICM change

Post by Wes »

It's a good idea to hit the aluminum the ICM mounts to with a wire brush, then put a very liberal amount of di-electric grease on the heat sink/ground. As well as a normal amount on the coil towers, and connector as mentioned above.
Image
92 Olds 98. L67, Gen 3 M62, 2.55 pulley, FWI, PLIM, 1.8 YTs.
yourgrandma wrote:High
Top
614justin
SSE Member
SSE Member
Posts: 123
Joined: Mon Aug 01, 2016 10:19 am
Year and Trim: 1995 bonneville se L36

Re: 1995 pontiac bonneville se ICM change

Post by 614justin »

Thanks. This a great site and service. Pure Americana, even if its made in Canada.
Top
Post Reply

Return to “1992-1999”