Discuss your 2000-2005 Bonneville SE, SLE, SSEi, Buick Le Sabre 00-05 and Buick Park Avenue 97-05. Please use General Chat for non-mechanical issues, and Performance and Brainstorming for improvements.
Ok I was wondering why my antifreeze has been disappearing this last week, once i got my car to run on 6 cyls again, I found a nice spray line on the bottom of the hood and antifreeze sprayed all over the passenger side of the engine bay. Found out it's coming out of this little 90 degree elbow behind the belt. How easy is this to change?
FWI, converted low beam bulbs into high beam bulbs, 20% tint all around, MSD wires, NDK TR55 plugs, auxiliary line in, scan gauge, custom FloPro/MagnaFlow Cat back exhaust
2002 Bonneville SE
FWI, converted low beam bulbs into high beam bulbs, 20% tint all around, MSD wires, NDK TR55 plugs, auxiliary line in, scan gauge, custom FloPro/MagnaFlow Cat back exhaust
2002 Bonneville SE
Defiantly get the metal elbows, local parts store to me stocked them:
Dorman 47065HP
when the old ones come out you will need to make sure if the ends brake off (which they most likely will) that you get the broken pieces out. I used the end of a needle nose pliers and was able to pry them out with very little effort. You should be able to do them without pulling the intake off again.