On a 2003 SSEi, I get Intermittent ABS, Brake, and Trac Off lights, with "Service Stability System on the DIC. It will come on and off randomly as I'm driving. Had the codes read - came up with C1298: PCM Class 2 Serial Data Link Malfunction.
At first I thought it was going to be the ABS Module. But now I'm not so sure.
Anybody ever have any experience with that code?
2003 SSEi ABS Code
-
redwingsfan34
- Posts like an L36
- Posts: 1076
- Joined: Wed May 21, 2008 9:55 pm
- Year and Trim: 01 Buick LeSabre
- Location: Lynchburg, VA
-
Archon
- Resident Gearhead
- Posts: 8781
- Joined: Mon May 19, 2008 10:30 pm
- Year and Trim: 2014 Cadillac XTS Vsport.
- Location: Grand Rapids, Michigan
Re: 2003 SSEi ABS Code
It still could be. This is some of the information regarding that code:
Possible causes of this DTC are the following conditions:
The EBCM has a class 2 serial data transmit fault.
The PCM has a class 2 serial data receiver fault.
The class 2 serial data line has an extremely high amount of traffic.
Loose or corroded EBCM ground or PCM ground.
Possible causes of this DTC are the following conditions:
The EBCM has a class 2 serial data transmit fault.
The PCM has a class 2 serial data receiver fault.
The class 2 serial data line has an extremely high amount of traffic.
Loose or corroded EBCM ground or PCM ground.
*Gone, but not forgotten* - Black 2000 SSEi, HIR Headlights, Angel Eyes fogs, 3rd brake light overlay, hi-flo cat, 180 degree thermostat, HS 1.9 rockers, LSx yellow springs, Intense FWI, PCM, shift kit, push rods, and 3.4 Pulley. ZZP Power Log.