need part names/numbers please
- Night Crawler
- Posts like an L36

- Posts: 827
- Joined: Thu May 22, 2008 12:32 am
- Year and Trim: 2002 Bonneville SE
- Location: Winnipeg, MB, Can (actually near Starbuck)
need part names/numbers please
I need the name and number for the wiper control modual that is attached to the driver side wiper arm. I believe this my be my problem for my wiper pump not working. (already replaced the pump) I read that water can get into it over time and wreck the circuit board.
Also need to know the name and number for a suspension part, hard to explain but it's in the rear end, just in front of the rear tires. I think it's the sub frame bushings but not sure. If anyone has a pic of the underside of our cars, i can show you exactly where i'm talking about.
Thanks in advance
Also need to know the name and number for a suspension part, hard to explain but it's in the rear end, just in front of the rear tires. I think it's the sub frame bushings but not sure. If anyone has a pic of the underside of our cars, i can show you exactly where i'm talking about.
Thanks in advance

FWI, converted low beam bulbs into high beam bulbs, 20% tint all around, MSD wires, NDK TR55 plugs, auxiliary line in, scan gauge, custom FloPro/MagnaFlow Cat back exhaust
2002 Bonneville SE
-
MrJiggy716
- Posts like an LG3

- Posts: 376
- Joined: Mon May 27, 2013 2:47 pm
- Year and Trim: 2000 SLE
- Location: Buffalo, NY
Re: need part names/numbers please
can you explain your wiper problem a bit better it sounds like your squirts aren't working?
-Justin
- Night Crawler
- Posts like an L36

- Posts: 827
- Joined: Thu May 22, 2008 12:32 am
- Year and Trim: 2002 Bonneville SE
- Location: Winnipeg, MB, Can (actually near Starbuck)
Re: need part names/numbers please

FWI, converted low beam bulbs into high beam bulbs, 20% tint all around, MSD wires, NDK TR55 plugs, auxiliary line in, scan gauge, custom FloPro/MagnaFlow Cat back exhaust
2002 Bonneville SE
-
MrJiggy716
- Posts like an LG3

- Posts: 376
- Joined: Mon May 27, 2013 2:47 pm
- Year and Trim: 2000 SLE
- Location: Buffalo, NY
Re: need part names/numbers please
Oh OK... I had the same problem http://www.pontiacbonnevilleclub.com/fo ... lit=squirt
I think your problem is in the switch in the actual stalk as was mine. If it was the circuit board, its likely your wipers wouldn't work as well. Pull one out of the bone yard or rock auto has them for pretty cheap (much cheaper then a new wiper motor set up) its an easy install pretty much plug and play maybe a half hour at most. Id definitely try that first ....
I think your problem is in the switch in the actual stalk as was mine. If it was the circuit board, its likely your wipers wouldn't work as well. Pull one out of the bone yard or rock auto has them for pretty cheap (much cheaper then a new wiper motor set up) its an easy install pretty much plug and play maybe a half hour at most. Id definitely try that first ....
-Justin
- Night Crawler
- Posts like an L36

- Posts: 827
- Joined: Thu May 22, 2008 12:32 am
- Year and Trim: 2002 Bonneville SE
- Location: Winnipeg, MB, Can (actually near Starbuck)
Re: need part names/numbers please
Can't find it on rock auto

FWI, converted low beam bulbs into high beam bulbs, 20% tint all around, MSD wires, NDK TR55 plugs, auxiliary line in, scan gauge, custom FloPro/MagnaFlow Cat back exhaust
2002 Bonneville SE
- harofreak00
- Administrator

- Posts: 26022
- Joined: Mon May 19, 2008 6:04 pm
- Year and Trim: 2004 GXP - plus a handful of other Bonnevilles
- Location: Browerville, MN
- Contact:
Re: need part names/numbers please
I have good used ones for $30 + shipping.
Andrew - owner/operator of Bonnevilles Unlimited

2004 Bonneville GXP | 60k | White Gold Tricoat | custom built supercharged 3800 hot rod | garage queen
1997 Corvette | 57k | Silver Metallic | Z06 wheels | Date-night Hauler/Parts runner
2014 Town & Country Limited | Cashmere Pearl | 115k | Family Hauler
2002 Ram 1500 Quad Cab Sport | Black| 280k | Official Bonneville Hauler

2004 Bonneville GXP | 60k | White Gold Tricoat | custom built supercharged 3800 hot rod | garage queen
1997 Corvette | 57k | Silver Metallic | Z06 wheels | Date-night Hauler/Parts runner
2014 Town & Country Limited | Cashmere Pearl | 115k | Family Hauler
2002 Ram 1500 Quad Cab Sport | Black| 280k | Official Bonneville Hauler
-
MrJiggy716
- Posts like an LG3

- Posts: 376
- Joined: Mon May 27, 2013 2:47 pm
- Year and Trim: 2000 SLE
- Location: Buffalo, NY
Re: need part names/numbers please
Id go with Andrew, Rock is charging 120+ for new ones, thought they were cheaper last I checked...
-Justin
- Night Crawler
- Posts like an L36

- Posts: 827
- Joined: Thu May 22, 2008 12:32 am
- Year and Trim: 2002 Bonneville SE
- Location: Winnipeg, MB, Can (actually near Starbuck)
Re: need part names/numbers please
anyone got the undercarriage pic of a bonneville so I can pin point the other part i'm looking for?

FWI, converted low beam bulbs into high beam bulbs, 20% tint all around, MSD wires, NDK TR55 plugs, auxiliary line in, scan gauge, custom FloPro/MagnaFlow Cat back exhaust
2002 Bonneville SE
- Night Crawler
- Posts like an L36

- Posts: 827
- Joined: Thu May 22, 2008 12:32 am
- Year and Trim: 2002 Bonneville SE
- Location: Winnipeg, MB, Can (actually near Starbuck)
Re: need part names/numbers please
this part i need is causing a flat metal bar to crush my emergency brake line.

FWI, converted low beam bulbs into high beam bulbs, 20% tint all around, MSD wires, NDK TR55 plugs, auxiliary line in, scan gauge, custom FloPro/MagnaFlow Cat back exhaust
2002 Bonneville SE
- Night Crawler
- Posts like an L36

- Posts: 827
- Joined: Thu May 22, 2008 12:32 am
- Year and Trim: 2002 Bonneville SE
- Location: Winnipeg, MB, Can (actually near Starbuck)
Re: need part names/numbers please
well installed the new wiper arm and it WORKED YAY!!!!!!!!!!! Thanks haro.
And i found the other two parts I need. They are called inulator: rear axle control arm support. #49 (canada version all the numbers are different so ours is 45, pic is american)

And i found the other two parts I need. They are called inulator: rear axle control arm support. #49 (canada version all the numbers are different so ours is 45, pic is american)

FWI, converted low beam bulbs into high beam bulbs, 20% tint all around, MSD wires, NDK TR55 plugs, auxiliary line in, scan gauge, custom FloPro/MagnaFlow Cat back exhaust
2002 Bonneville SE
- harofreak00
- Administrator

- Posts: 26022
- Joined: Mon May 19, 2008 6:04 pm
- Year and Trim: 2004 GXP - plus a handful of other Bonnevilles
- Location: Browerville, MN
- Contact:
Re: need part names/numbers please
I'd just call that a subframe bushing. I should have one.
Andrew - owner/operator of Bonnevilles Unlimited

2004 Bonneville GXP | 60k | White Gold Tricoat | custom built supercharged 3800 hot rod | garage queen
1997 Corvette | 57k | Silver Metallic | Z06 wheels | Date-night Hauler/Parts runner
2014 Town & Country Limited | Cashmere Pearl | 115k | Family Hauler
2002 Ram 1500 Quad Cab Sport | Black| 280k | Official Bonneville Hauler

2004 Bonneville GXP | 60k | White Gold Tricoat | custom built supercharged 3800 hot rod | garage queen
1997 Corvette | 57k | Silver Metallic | Z06 wheels | Date-night Hauler/Parts runner
2014 Town & Country Limited | Cashmere Pearl | 115k | Family Hauler
2002 Ram 1500 Quad Cab Sport | Black| 280k | Official Bonneville Hauler
- Night Crawler
- Posts like an L36

- Posts: 827
- Joined: Thu May 22, 2008 12:32 am
- Year and Trim: 2002 Bonneville SE
- Location: Winnipeg, MB, Can (actually near Starbuck)
Re: need part names/numbers please
i need two. both of mine are shot and are crushing my emergency brake cable. as above it is part 49. I ordered some today but when I went to pick them up, the ones they had were part 45 on that diagram which are smaller.

FWI, converted low beam bulbs into high beam bulbs, 20% tint all around, MSD wires, NDK TR55 plugs, auxiliary line in, scan gauge, custom FloPro/MagnaFlow Cat back exhaust
2002 Bonneville SE

