wow wee
that middle rear spark plug wire is a PITA to get off. any suggestions?
thx
mike
2003 spark plug, middle back = PITA
Re: 2003 spark plug, middle back = PITA
remove engine cover and straight over the top of the engine standing on the passanger side (lay on the motor a little).. long handle ratchet and a good shove to get it lose.. once its loose its easy. I used a plug socket short extension and a long ratchet to brake it lose.. then a short retchet with a swivel handle to get it out fast. Long handle=leaverage..
when you put the new ones in make sure to use a good ammount of Anti-sieze on the threads and some plug boot grease on the heads for the wires.
when you put the new ones in make sure to use a good ammount of Anti-sieze on the threads and some plug boot grease on the heads for the wires.
Shane "RedZMonte"
2004 Z16 Z06: Virgin
2000 SSEi: Kenwood DDX512, 3.25" MPS, ZZP DP, PLog, Puck Mount, NGK TR7's, DHP Tuned
1995 Monte Z34: T04e "60" turbo, 42.5# injectors, Borla Catback, OBDII swap, DHP Tuned, Much more...
2004 Z16 Z06: Virgin
2000 SSEi: Kenwood DDX512, 3.25" MPS, ZZP DP, PLog, Puck Mount, NGK TR7's, DHP Tuned
1995 Monte Z34: T04e "60" turbo, 42.5# injectors, Borla Catback, OBDII swap, DHP Tuned, Much more...
- SSEiMan01
- Certified Bonneville Nut

- Posts: 5766
- Joined: Sun Dec 05, 2010 6:17 pm
- Year and Trim: .
92 SSE
92 Lumina Z34
99 Tahoe
03 PAU - Location: DeKalb, IL
Re: 2003 spark plug, middle back = PITA
Also I'm of the group that removes the spring boots and throws them away right away. They make wires way harder to get off in my opinion.
Will
91 Riviera | S2 L67 Swap/4T60E | 127K mi | Antelope Met. w/ Tan Int. | Saved From Death By Crusher
92 Bonneville SSE | L67/4T60E | 77K mi | Med Slate Grey w/ Two-Tone Grey Int. | Low Miles Time Capsule
92 Lumina Z34 | LQ1/4T60E | 177k mi | Torch Red w/Grey Int. | Rusty In Odd Spots
99 Tahoe LT | L31/4L65E | 276k mi | Spiral Grey Metallic w/Grey Int. | Truck for Truck Things and Portable Concert Hall
02 Bonneville SSEi | 171k mi | Black w/Neutral Int. | Backup and road trip car
03 Park Avenue Ultra | 212K mi | White Diamond Met. w/ Shale Int. | Southern Time Capsule
05 Acura RL | 165K mi | Carbon Grey Pearl w/Ebony Int. | The Super-Hooptie Daily
91 Riviera | S2 L67 Swap/4T60E | 127K mi | Antelope Met. w/ Tan Int. | Saved From Death By Crusher
92 Bonneville SSE | L67/4T60E | 77K mi | Med Slate Grey w/ Two-Tone Grey Int. | Low Miles Time Capsule
92 Lumina Z34 | LQ1/4T60E | 177k mi | Torch Red w/Grey Int. | Rusty In Odd Spots
99 Tahoe LT | L31/4L65E | 276k mi | Spiral Grey Metallic w/Grey Int. | Truck for Truck Things and Portable Concert Hall
02 Bonneville SSEi | 171k mi | Black w/Neutral Int. | Backup and road trip car
03 Park Avenue Ultra | 212K mi | White Diamond Met. w/ Shale Int. | Southern Time Capsule
05 Acura RL | 165K mi | Carbon Grey Pearl w/Ebony Int. | The Super-Hooptie Daily
James May wrote:Hello.
Re: 2003 spark plug, middle back = PITA
THANK YOU for the great ideas!
Awesome!

Awesome!
Re: 2003 spark plug, middle back = PITA
this is such a HARD plug wire to get too!
Yikes....
Yikes....
-
96 SSEi
- Posts like a Northstar

- Posts: 1813
- Joined: Sun Aug 22, 2010 11:11 pm
- Year and Trim: 2000 Bonniville SSEi L67
- Location: Ontario, Canada
Re: 2003 spark plug, middle back = PITA
CLAMP SMALL VICE grips on the boot above heat shield.
then get pry-bar and pop the boot off the plug - works great!!
then get pry-bar and pop the boot off the plug - works great!!
poverty forces one to do unorthodox things
2000 SSEi
past rides:
1996 SSEi
1992 GTP
1987 Grand Am
2000 SSEi
past rides:
1996 SSEi
1992 GTP
1987 Grand Am
-
Abbby
- SSE Member

- Posts: 105
- Joined: Thu Jul 26, 2012 7:36 pm
- Year and Trim: 2003 SLE 208,000 miles
2003 SLE 196,000 miles
Re: 2003 spark plug, middle back = PITA
First thing I like to do is to remove the bracket in the back used for pulling the engine and holding the cover. That is a little pain to get off but makes things easier down the road. Just leave it off. Unlikely you will need it. Yes it does help hold plastic engine cover in place but cover sits there just fine without it.


