Make a long story short.. one of my speed sensor is failing intermitantly causing my ABS to kick in.
So at the current time I want to pull the fuse to disabe the ABS.
Where is the fuse for the ABS?
Where's the ABS fuse?
- drifter420
- Certified Bonneville Nut

- Posts: 2806
- Joined: Tue Jun 10, 2008 9:22 am
- Year and Trim: 97 SSEI
Where's the ABS fuse?

AEM dryflow, 180 T stat, magnaflow hi flo cat, TR55 NGK Iridiums, Belden wires.. Waiting to remedy KR before 3.4 pulley goes on
-
bonnevillain
- Retired Site Developer

- Posts: 3046
- Joined: Wed May 21, 2008 11:07 pm
- Year and Trim: 2002 SLE
- Location: Minnesota
Re: Where's the ABS fuse?
you should have a diagram in your owners manual if you have it. you could probably disconnect the ABS module itself also
- drifter420
- Certified Bonneville Nut

- Posts: 2806
- Joined: Tue Jun 10, 2008 9:22 am
- Year and Trim: 97 SSEI
Re: Where's the ABS fuse?
I rather not have live dangling wires around. So a fuse is more preferable.
No I dont have my manual.. can't find it.. ( but saw it 2 months ago )
Always the case when you need it.. you can't find it :sad5:
No I dont have my manual.. can't find it.. ( but saw it 2 months ago )
Always the case when you need it.. you can't find it :sad5:

AEM dryflow, 180 T stat, magnaflow hi flo cat, TR55 NGK Iridiums, Belden wires.. Waiting to remedy KR before 3.4 pulley goes on
-
sonoma_zr2
- Retired Gearhead

- Posts: 3643
- Joined: Tue May 20, 2008 9:39 am
- Year and Trim: 1999 SSEi
1997 SSEi-Resting-353K - Location: Montevideo, MN
Re: Where's the ABS fuse?
there are 3, 2 under the hood (a1 and a2, 40A each) and one in the drivers side box (5b - 10A). I think you want the drivers ip box fuse. abs/ccr. the ones in the engine fuse center are labeled abs/mot and abs/sol

