SC Pulley ?

All questions and problems regarding Superchargers, Turbos, NOS, ZEX, intercoolers, water injection, etc.
Post Reply
User avatar
crush
SLE Member
SLE Member
Posts: 41
Joined: Sat Jun 07, 2008 10:03 pm
Year and Trim: 1992 SSEi
Contact:
Contact crush

SC Pulley ?

Post by crush »

How would I measure my SC pulley properly? I put a tape across the center outside to outside moved it back and forth the longest point only 2.75 inches. Then I measured the groves and they were 2.5 inches. This could be a problem to me as I have no scan tool. To the best of my knowlage the it was a stock SSEi
CrusH
Top
User avatar
harofreak00
Administrator
Administrator
Posts: 26022
Joined: Mon May 19, 2008 6:04 pm
Year and Trim: 2004 GXP - plus a handful of other Bonnevilles
Location: Browerville, MN
Contact:
Contact harofreak00

Re: SC Pulley ?

Post by harofreak00 »

92-93 stock pullies are 2.55"
94-95 stock pullies are 2.85"
Andrew - owner/operator of Bonnevilles Unlimited
Image
2004 Bonneville GXP | 60k | White Gold Tricoat | custom built supercharged 3800 hot rod | garage queen
1997 Corvette | 57k | Silver Metallic | Z06 wheels | Date-night Hauler/Parts runner
2014 Town & Country Limited | Cashmere Pearl | 115k | Family Hauler
2002 Ram 1500 Quad Cab Sport | Black| 280k | Official Bonneville Hauler
Top
User avatar
crush
SLE Member
SLE Member
Posts: 41
Joined: Sat Jun 07, 2008 10:03 pm
Year and Trim: 1992 SSEi
Contact:
Contact crush

Re: SC Pulley ?

Post by crush »

:) Thanks for the info. My local GM house said it was 3.8 and that had me worried.
CrusH
Top
bonnevillain
Retired Site Developer
Retired Site Developer
Posts: 3046
Joined: Wed May 21, 2008 11:07 pm
Year and Trim: 2002 SLE
Location: Minnesota

Re: SC Pulley ?

Post by bonnevillain »

that's series II
Top
Post Reply

Return to “Forced Induction”