Door Panel Removal.
-
Blown93SSEi
- Posts like an L67
- Posts: 1424
- Joined: Tue May 27, 2008 2:48 pm
- Year and Trim: Dark Green 1997 SSEi
- Location: Machesney Park, IL
Door Panel Removal.
What tools do I need and how do I remove the front passenger door panel?
Jacob, Dark Green 1997 SSEi "The Green Lantern" Over 268,000 Miles and Still Going Strong!
Mods/Stuff: INTENSE! FWI, ScanGauge 2, Mobil 1 HM Oil, Valvoline HM Transmission Fluid, Mildly Tuned PCM, Drilled 180 Thermostat, Cleared Corners, Silverstars, Chrome T-Stars, NGK Iridium Plugs, NAPA Belden Wires.
Mods/Stuff: INTENSE! FWI, ScanGauge 2, Mobil 1 HM Oil, Valvoline HM Transmission Fluid, Mildly Tuned PCM, Drilled 180 Thermostat, Cleared Corners, Silverstars, Chrome T-Stars, NGK Iridium Plugs, NAPA Belden Wires.
-
PLAGUE PHANTOM
- Posts like an L27
- Posts: 709
- Joined: Tue Dec 14, 2010 2:32 am
- Year and Trim: 1968 Chevrolet Bel Air
- Location: Indianapolis, IN
Re: Door Panel Removal.
You will need a 10 mm socket and extensions, a flat blade screw driver, trim removal tool, you will also need a torx bit but I can't think of the size of the top of my my skull. The bolts/nuts are located behind the handle, the lights located on the door and behind the door cup holder. After you remove those start at the bottom and work your way up removing the panel clips. Once the door is hanging from the top portion...gently lift the panel of the door.
1997 Bonneville SLE...(SilverStreak)...Totaled...1/25/13...Gone but not forgotten.
1968 Chevrolet Bel Air....the project
1968 Chevrolet Bel Air....the project
