dayco poly cog serp belt
-
2003BlackSapphireSLE
- SLE Member
- Posts: 64
- Joined: Wed Jan 20, 2010 8:58 pm
- Year and Trim: 2003 Pontiac Bonneville SLE
dayco poly cog serp belt
i wanna buy a dayco poly cog serp belt for my 2003 sle. i cannot find anywhere. does anybody know where i can find one?
2003 Pontiac Bonneville SLE - Sylvania Silverstar Fog lights, 5000k HID conversion low beams, Disabled DRL, cranking headlight delay kit, GXP style exhaust tips, solid front mount. Approx. 86k miles and still kickin strong!
-
01bonneSC
- Certified Bonneville Nut
- Posts: 4938
- Joined: Sat May 24, 2008 5:18 pm
- Year and Trim: 05 Chevy 'Hoe
1997 'maro (3.8L M5)
89 SkiDoo - Location: Sycamore, IL
Re: dayco poly cog serp belt
00Beast wrote:Less off-topic than Lane's Heated Steering wheel, but yeah, back to the topic.
-
J Wikoff
- Administrator
- Posts: 17080
- Joined: Mon May 19, 2008 7:01 pm
- Year and Trim: 1992 SSE
2009 G8 GT - Location: Central Illinois
- Contact:
Re: dayco poly cog serp belt
I've had one of those. It didn't last near as long as Gatorbacks seem to.
WHITE WHINE - 1992 SSE Supercharged 236.26 ci (.040 Over) 15.090 at 90.2 MPH on old engine w/ slipping trans & melted O2 sensor - Gen 3 M62 and matching TB, Gen 2 Pully, Zillamotorsports Ported LIM, YT 1.72 Roller Rockers, SII FPR & Injectors, Hypertech Thermomaster chip w/ 160 Thermo, TransGo Shift Kit, Infinity/Pioneer Speakers & a 10" Alpine Type R Sub, all the watts, 140 amp Alternator, Ricepipe CAI w/ heatshield, Pilot Angel Eye Foglights, Clear Corners, '02 17" Chrome Bent 5's, Magnaflow F-Body Muffler and Hi-flo Cat, Ceramic Coated Ported Exhaust Manifolds, Fan Override, Monroe Reflex struts, red calipers
2009 G8 GT - Sport Red Metallic, loaded, SOLO Axlebacks, Rotofab Intake, Tuned, autodim mirror, removed intake manifold cover, HSV GTS triple gauge pod, two tone red-hot shifter and HSV SuperSport steering wheel, GXP rear sway bar and diffuser, 3.45 diff and various Camaro suspension bits, LED Taillights
-
00Beast
- Retired Site Developer
- Posts: 20960
- Joined: Tue May 27, 2008 10:30 pm
- Year and Trim: '17 Silverado 1500
- Location: MN/IA
- Contact:
Re: dayco poly cog serp belt
I agree. I have a pair on my car, and they seem kinda crappy. My local Advance stocks them. Get either a Gates or a Gatorback.
Bye Bye:
RIP sandrock
RIP sandrock
Sirius wrote:Think about it. You’re tooling down the road in your Prius, knowing full-well that this thing being green is as big a sham as federally mandated ethanol-enriched gas, Russia pulling out of Ukraine, and Obamacare.
-
2003BlackSapphireSLE
- SLE Member
- Posts: 64
- Joined: Wed Jan 20, 2010 8:58 pm
- Year and Trim: 2003 Pontiac Bonneville SLE
Re: dayco poly cog serp belt
ok i see amazon has them thats good. what is the part number for the 2003 sle n/a? and is a 2005 sle n/a the same? my dad needs one too.
2003 Pontiac Bonneville SLE - Sylvania Silverstar Fog lights, 5000k HID conversion low beams, Disabled DRL, cranking headlight delay kit, GXP style exhaust tips, solid front mount. Approx. 86k miles and still kickin strong!
-
willwren
- Retired Admin
- Posts: 65489
- Joined: Sun May 18, 2008 11:07 pm
- Year and Trim: .
93 SSEi
95 SLE (SC)
97 Buick LeSabre - Location: Oregon WCBF'04, '05, '06, '07, '08, '09, '10, '11 Survivor
- Contact:
Re: dayco poly cog serp belt
That's the worst belt I ever ran on my cars. Both belts on my 95 were that, and the writing was still visible when I bought the car, so they were fairly new. One failed and the other was splitting in just over a year.
Get a gatorback.
Get a gatorback.
Click here for mod list for both cars
93 SSEi, 95 SLE (supercharged) 97 Buick LeSabre Limited
PontiacDad at WCBF '04: Cruise control? That's like surrendering!
Comprehensive guide to troubleshooting, rebuilding, and modifying Eaton Superchargers
-
white06lacrossecxs
- SSEi Member
- Posts: 163
- Joined: Mon May 26, 2008 3:27 pm
- Year and Trim: 2006 Buick Lacrosse CXS
- Location: California
- Contact:
Re: dayco poly cog serp belt
I used one when I had my Taurus, it was falling apart after only 6 months
-
Merrillspontiac
- Posts like an LN3
- Posts: 523
- Joined: Fri May 23, 2008 12:37 am
- Year and Trim: 2000 Pontiac Bonneville SE
- Location: Muskego Wisconsin
Re: dayco poly cog serp belt
I still have the original belt on my 00 SE after 145,000 miles, should I replace it?
2000 Pontiac Bonneville SE
1997 Oldsmobile Eighty Eight LS
1993 Buick Regal GS Coupe
1992 Buick Regal Limited Coupe
1997 Oldsmobile Eighty Eight LS
1993 Buick Regal GS Coupe
1992 Buick Regal Limited Coupe
-
gonzo4191
- Certified Bonneville Nut
- Posts: 2616
- Joined: Wed May 21, 2008 9:52 pm
- Year and Trim: 91 S10 P/U
97 SSEI- 136k - Location: round lake beach, IL
- Contact:
Re: dayco poly cog serp belt
i would !!
-Juan
No bonnie!
93 s10 ex cab: 2.8: t5: exhaust: tbi mods. 5.3, 76mm, and a D.r cam on a stand
No bonnie!
93 s10 ex cab: 2.8: t5: exhaust: tbi mods. 5.3, 76mm, and a D.r cam on a stand
-
00Beast
- Retired Site Developer
- Posts: 20960
- Joined: Tue May 27, 2008 10:30 pm
- Year and Trim: '17 Silverado 1500
- Location: MN/IA
- Contact:
Re: dayco poly cog serp belt
Yes. New belts don't show wear by cracking, they just get worn out, and the grooves can't grip the pulleys, and cause issues. It takes 30 minutes, and $30 for peace of mind that your car will keep on keeping on.
Bye Bye:
RIP sandrock
RIP sandrock
Sirius wrote:Think about it. You’re tooling down the road in your Prius, knowing full-well that this thing being green is as big a sham as federally mandated ethanol-enriched gas, Russia pulling out of Ukraine, and Obamacare.
-
01bonneSC
- Certified Bonneville Nut
- Posts: 4938
- Joined: Sat May 24, 2008 5:18 pm
- Year and Trim: 05 Chevy 'Hoe
1997 'maro (3.8L M5)
89 SkiDoo - Location: Sycamore, IL
Re: dayco poly cog serp belt
30 min?!?! I hope thats with one arm tied behind you back, Ed.00Beast wrote: It takes 30 minutes
00Beast wrote:Less off-topic than Lane's Heated Steering wheel, but yeah, back to the topic.
-
bonneville dan-o
- Posts like an LN3
- Posts: 419
- Joined: Sun Mar 01, 2009 10:22 pm
- Year and Trim: 2000 ssei
2004 GXP
Re: dayco poly cog serp belt
agreed!2006 Crown Vic, white P71 interceptor. Push bar, 35% tint.
TRADED IN! 2008 G8 Ignition Orange Metallic LY7, 47k miles, Flowmasters, all options but sunroof.
SOLD! 2000 SSEI Black, 180 t-stat, autolite 104's, 3.4" MPS, custom M&D CAI, 1/8" phenolic S/C spacer, throttle body heat sheild, solid front mount, MSD wires, shift kit, 3rd brake light overlay, cleared headlights, tinted and cleared tails, 20% tint, Syntec, ARP license plate bolts Goodyear Eagle GT's,disabled DRL's, 8000k H.I.D's, pilot angel eye fogs
TRADED IN2004 GXP Black. 53,000mi.... drop in K&N filter, 5000k H.I.D. lows, 8000k H.I.D fogs, switchback 5000K turn signals. cleared headlights. 20% Tint.
TRADED IN! 2008 G8 Ignition Orange Metallic LY7, 47k miles, Flowmasters, all options but sunroof.
SOLD! 2000 SSEI Black, 180 t-stat, autolite 104's, 3.4" MPS, custom M&D CAI, 1/8" phenolic S/C spacer, throttle body heat sheild, solid front mount, MSD wires, shift kit, 3rd brake light overlay, cleared headlights, tinted and cleared tails, 20% tint, Syntec, ARP license plate bolts Goodyear Eagle GT's,disabled DRL's, 8000k H.I.D's, pilot angel eye fogs
TRADED IN2004 GXP Black. 53,000mi.... drop in K&N filter, 5000k H.I.D. lows, 8000k H.I.D fogs, switchback 5000K turn signals. cleared headlights. 20% Tint.
-
bonnevillain
- Retired Site Developer
- Posts: 3046
- Joined: Wed May 21, 2008 11:07 pm
- Year and Trim: 2002 SLE
- Location: Minnesota
Re: dayco poly cog serp belt
Most of it is spent trying to figure out the *dang* routing because even after the 10th time you still don't have a diagram of the belt path
-
01bonneSC
- Certified Bonneville Nut
- Posts: 4938
- Joined: Sat May 24, 2008 5:18 pm
- Year and Trim: 05 Chevy 'Hoe
1997 'maro (3.8L M5)
89 SkiDoo - Location: Sycamore, IL
Re: dayco poly cog serp belt
Now we all have one!!! 
00Beast wrote:Less off-topic than Lane's Heated Steering wheel, but yeah, back to the topic.
-
00Beast
- Retired Site Developer
- Posts: 20960
- Joined: Tue May 27, 2008 10:30 pm
- Year and Trim: '17 Silverado 1500
- Location: MN/IA
- Contact:
Re: dayco poly cog serp belt
That's both, and fighting with the routing, LOL.01bonneSC wrote:30 min?!?! I hope thats with one arm tied behind you back, Ed.00Beast wrote: It takes 30 minutes
Bye Bye:
RIP sandrock
RIP sandrock
Sirius wrote:Think about it. You’re tooling down the road in your Prius, knowing full-well that this thing being green is as big a sham as federally mandated ethanol-enriched gas, Russia pulling out of Ukraine, and Obamacare.