Thanx 2 harofreak00,
appreciate word for word as well as diagrams.

Looking for directions for removal ECBM on 02 Bonneville, seems to be a limited subject.
Thanks for the photo showing correct location on "02. u know who u r.

Happy to report after RE- balancing front tires and rear tires, the "OLEBONNEVILLE" is running like a champ. I'm kinda afraid to say that as something else might happen.
Balancing took 99.999% of the shimmy away. Also put new rotors and pads on today.
KarKar good except for rust by gas tank.That's ...

Back to 11:00 TO 1:00,
I used those hrs. to give u the idea as to the direction my steering wheel was shimmying. (shimmying????)
Finally will be checking front wheel balancing today, and while that's being done look at control arm bushing and front end.
Will keep y'al posted

Tanx

Well folks,
This Mon. was a good day!
Went to mechanic friend, checked out rearend, found not a slightly leaking shock ,but "SHOT" shocks.
Also looked at swaybar links.
Got parts(those ma822 airs, moogshock mounts, and the links) y'al suggested. Installed them. Took road test, "AMAZIN"!! Would say ...

Spoke with my mechanic bud, Mon will chk out rear end. He's guessing sway bushing, or a bushing of some sort. If shocks, have already contacted supplier bud to get them quick.
Will keep y'al posted.

My assumption is that they are in the front & I'd have been told about them being bad if they were.
Are there sway bars in the rear that could be causing this issue? Possibly Trans mounts or motor mounts in front???

Help! I'm back,
Had tire rotation and balance, asked to align front and rear. Was told rear needed shim kit to bing it in. $16.00 each side,not bad ,2 hrs work $70.00 an hour, that's bad.
Went second location, told my problem would not be solved with a rear alignment and I'm within specs.
PROBLEM ...

Thanx,
I'm realy learninig, trying to save money.
Darn dealer wants $90.00 an hour lately, with no guarantees.
Apprecaite cudos.
2 big storms last night, "NO WAH WAH"

Guess what Peeps!
Problem solved!!!!!!!
After pulling door and reviewing page #4 of "Door Leaks" link, some real studing and thinking, allowed me to see the problem:
1) When reflectors were resealed, my helper pulled the rearview mirror harness through the relector, rather than feeding it up and to ...

Those of you who have followed, know that I have recently completed ; removing door panels and resealing them all, pulled interior and driver seat inorder to reconnect roof drain driver side, removed corroded ped connector and resolderd little tan wires to get doors and windows working. Having done ...

Well y'all,
I have never noticed this happening in the 9 yrs. I've driven my Bonne.
Maybe it was turned offf all that time, and during my recent disection of the car,car, I have reset the feature. Thus making me think something was malfunctioning.
I'm currently very sensitive to anything going on ...

Is there anyone with experience with a spastic pwr mirror?
Seems when 1st start Bonne, put it in reverse, mirror begins to move out of position. Then when put into drive it returns to set position.
Now What???
Have just about rebuilt parts of Bonne in past Month & 1/2.

Ladies and Gentlemen,
I want to thank you for all your assitance on my RR door malfunctioning, it really got to me after all the time spent on getting to those little"TAN"wires, under the driver seat that corrode due to water leaks in car fixed, as well as those leaks.
Then having all functioning ...

Ya know,
I"m just a beginner, needy of great instruction and direction, which I've received from everyone I've come in contact with since joining the club. I take my time to be sure not to cause a chain of unfortunate events, as a result of hastiness.
Learned most of my understanding from past ...

Just got off line with rockauto, I had entered all code #'s available: AFH50M-05, which is on my current MAF,, AC#2134337, which is # the dealer gave me, and a general search following steps outlined by rockauto. None of the sensors displayed looked like needed unit, majority had vacumline hookup ...

I Pm'd halofreak00 a bit ago awaiting his reply.
Also thanx for the amf #
To both of u, 00Beast, and 01bonneSCWillkeep thread updated.

Well couldn't wait, went out took plastic deflector partially down for now, reconnected pwr, tried running window up & dwn. regulator didnot move onslide at all.
I did notice a fine blk cable loosening and tightening.
That's all for tonight.
Right now even though u gave great instructions, Do not ...

Will ck it out further tomorrow.
Thanx, will keep u posted.

Thanx for code, will obviously only use if cannot find part elsewhere.