Im going to rent the tool from AutoZone and do the job myself i just bought an ac delco inner tie rod

Went to get a state inspection finally cleared all my emission codes but failed because of inner tie rod. Any where i can find a write on this for our cars, also any suggestions on brand i should get or does it even matter when comes to this. I usually replace everything with delco but ive spent ...

i have a p0171 and have a bit of a hard start when i first turn it on

Is this corrosion around the MAF sensor affect it in anyway?

I want to replace my turn signal flasher

I'm trying to change a couple fuses and I understand there are a few locations for them.I can access the bottom instrument panel fuse on the drivers side. Now my question is how would I go about changing the fuses by the sound insulators or the top of the instrument panel fuses. Hope you guys can ...

After i finally fix everything mechanically i know hit another wall.. As i drove today the lights on my dash are not working and my signals inside or outside are not working? Need some help? Fuse ? Relay? thanks in advance

Would just need to replace the tube or something else? i dont know if i should replace the 02 sensor

Gonna need help on this one ive been dealing with this p0171 code for about a month ive cleaned the MAF sensor and tested it, ive checked for vac leaks found one and replaced the line . Now im going to do the fuel filter next which i should do since i do get hard starts. and ive been told to change ...

How would i go about bleeding a cooling system on a 98 lesabre just want to make sure i have all air out, i see the bleeder just wanna make sure its running good

i mustve missed that part about that date gonna take another look real good article, now if i have the new aluminum should i worry about the dex still being in there?Cause from this article and my own research dex was terrible for the 3800

Are there any ways without taking off the intake manifold to see if my gaskets are good such as pressure testing or anything else..when i look around the manifold i see an orange outline in some spots i dont have any coolant loss...def going to try and flush the coolant out asap

Thanks guys I will flush out that dex and put in prestone mixs any in asap

yea im running dexcool in my car really confused as to what to do keep the dex and just maintain it or go green...i thought i had a manifold leak cause i was losing coolant but after replacing the resevoir i havent had any coolant loss, i got the car with about 110,00 miles and i know stock the car ...

I was wondering what you guys have running through your cooling systems dexcool? or the green stuff?

This were i found my crack when using the Carb Cleaner the idle def changes now i just need to figure out how to change this and hopefully get this p0171 code cleared. Its two lines going to the throttle going to the fuel pressure regulator and the other one i honestly dont know where it goes
http ...

I did the good ol spray down with carb cleaner to find a vacuum leak and i came upon this crack that has two lines that go into the throttle body, one is coming from the fuel regulator and the other to be honest im not sure, from the looks of the pics can anyone tell me how to fix this...the upclose ...

This has happened to me twice in one month but the job is fairly easy just take the panel off and just take the nuts off the original side view mirror and put them on the new one mirror gonna be a pain putting the nuts on if you have big hands.using a magnet also helps with this . also be careful ...

Did a carb spray on the vacuum lines and found a crack from the throttle body and leads to the regulator its two lines that combine into one..would provide a pic but on this site not sure how too

Just to make sure this is right by were the cylinder 6 spark plug is right?