you need any help pm me

I just replaced the crank sensors which is about the same thing . take the lower valance plastic down the part under the bumper cover and access the 3 13 mm bolts that way.drop the oil adapter there is no easy way really its not that bad it goes in much easier than it comes out.

05 gxp replaced A and B sensors still throwing same codes and barely running.I do not have a scanner capable of re learn.I saw some replaced and didnt have to do re learn.Any help would be appreciated about to just scrap the POS.

How hard is it to remove its starting to sag in a couple places should i try to glue like it is or remove?

thanks will let you know what I find hot a f and supposed to rain today.

will do thanks what fuse is it and where is the height adjustment

I know the door seals are good I have pics I have no idea where its coming from. I have read a lot of these old threads I will read again I tried to post pics but it didn't work out so good.I want to get the car painted but am not going too until I fix the water leak If i could post the pics it ...

So i hooked my jump box up to it the other day and wasnt paying attention Had them reversed for a second now the radio doesnt work the hvac controls light up but the blower doesnt work checked all the fuses and no luck

I used to hear it kick on all the time truth be told i havent in a long while what gives?

I hope this is in the right place been having issues on this site when using on phone.Water in pass back floor i have read the threads no sunroof the door seals are fine i need to figure it out.I want to paint the car but cant until this issue is resolved i took some pics of seals etc . I was going ...

Sea foam doesn't have one active ingredient that does anything maybe the little bit of alcohol but the naptha or pale oil does nothing whatsoever it's like a Lucas product all marketing and pure garbage.I used to use sea foam before I knew better.I have used E 85 in several vehicles long term and ...

please tell me you dont believe sea foam does anything. and i have used E 85 in numerous cars with good results .If i cut the cat off i would get the CEL turned off of course. i dont see a need for it not when i am trying to eliminate problems.Its one good thing about our *shoot* state no sniffer ...

Ordered a fuel filter and will cut cat off and pipe it. I was just hoping it was simple as cleaning the sensors. I think I will add some E 85 to help clean but the inside of the TB didn't look bad at all.Will do that then update.

There is no specific cyl misfire I will do plugs and wires as maintenance but I would of thought it would say which cyl it is. The car sat so it has bad gas it's been running a little better the more I run it but no where near 100%.The previous owner seemed to think the cat was bad but idk how he ...

bought a gxp for a song but runs like crap.Codes are as follows 108 manifold absolute pressure circuit high,300 random misfire,336 and 386 crank sensor range/perf A & B.I googled and said to clean the sensors but wanted some input from others who have been down this road.I havent had any luck ...