Ok, I still cant seem to find the year date stamp, so to be safe im just going to replace it. Can anyone give me a link to buy the best replacement kit?

Im not very mechanically inclined but I believe im going to attempt the job myself. Are there any special tools required? Also what else is ...

Ok, so I replaced the compressor, drier and orfior tube after I replaced the broken air mix acutator and am still getting hot air. So I looked and even after replacing the actutator, it does not move when I set hot or cold. Its always stays hot. So I unhooked the actutator arm and manually moved the ...

I did notice on the month stamp, there is an an arrow pointing to the month. Then on one side if the arrow is a 1 then other side is a 2. So is that possibly 2012? I cant for the life of me see any ither year stamp. Also the UIM gasket just appears to be black and the lower I notice has an orange ...

Thats unbelievable about the debris in the evaporator. I will take it to a shop to check for a leak, I just dont see why when I bought one of those cans of refrigerant that has the guage on it, it showed 15 psi and while filling it went to 25 psi quickly but wouldnt get an higher no matter how much ...

Yes I did disconnect the battery during install as well as the hvac programer which the actutator plugs into.the vents work as they should but I dont notice the arm moving while changing vents. My concern is that the ac blows hot even though the compressor spins as well as the clutch so I didnt know ...

Just bought a 98 sse with 93k miles and I have no way of telling if it the original intake manifold or not? There only to date stamps one with the day then another with the arrow pointing to the month. Any ideas, I plan on keeping this car for years and want to make sure I dont have any issues.

Good point mike. I will look into what you are saying about new or used parts. I am in SC and it seems like most places are charging close to 300 for labor if I supply the parts, which I found for 240 for ac delco new compressor, orfice tube and accumulator. Is it possible there is just a leak and ...

So I replaced the air mix actutator today and calibrated it as instructed by setting to 90 degrees and reattatching the arm for the blend doors new pisition. My question is I noticed the arm move when I set it initially set it to 90 but after I reattach the arm and chage setting to 60 it apears it ...

So I replaced the air mix actutator today and calibrated it as instructed by setting to 90 degrees and reattatching the arm for the blend doors new pisition. My question is I noticed the arm move when I set it initially set it to 90 but after I reattach the arm and chage setting to 60 it apears it ...

Thanks for input guys. I got a quote of $630 to fix the a/c, I.e compressor and whatever else required when doing the job. Does tbat sound reasonable???

I was following great write on found here to fix the air blend actutator. While removing it I had to dissconect the hvac prgrammer and disconnect the vaccum line connector. While pulling off the connector the nipples on the havac programmer ripped off. These are the soft ones. On the write up it ...

That is exactly the info I was looking for. I tried to check if the UIM was replaced by checking manufacturer date. I only saw 2 stamps. One with the day, then another that showed an arrow to the 11th month and then a big number 1 and then a 2 that separates the arrow pointing to the month. So I ...

Just purchased a 98 SSE with approx. 93k miles. I was thinking of having tne coolant flushed and the transmission fluid changed along with new plugs and wires, to keep it running good. Does this sound like something that is advisable? Is there anything else i should look into to keep things running ...

I am a first time owner of a ne 1998 SSE. Seems to have been taken care of. The issue I am having is when the electronic climate control is set for a/c it blows hot air. I tried to fill up the system with refrigerant but no luck. The gauge showed it was at 15 psi but after adding a huge can of ...