Page 1 of 1

p0300 randon misfire

Posted: Mon Oct 15, 2018 12:42 pm
by jcweis1
Thought I would post what I failed to see to correct my random misfire.
I thought I had checked everything listed to correct P0300. It came down to a small crack in one of the ignition coils. Felt really dumb not seeing the crack and not checking the OHM test of each coil. I only used a ignition spark light tester and thought all the coils were good.
Maybe this will help others.

Re: p0300 randon misfire

Posted: Mon Oct 15, 2018 4:31 pm
by nos4blood70
Thanks for posting your experience in this matter.

Always a good place to start with misfires or chugging/sputtering issues: check over the whole ignition system.

Re: p0300 randon misfire

Posted: Tue Oct 16, 2018 6:09 pm
by luke_dubs
I think someone should post a picture on where the ignition coil is located....yanno. Just for reference

Re: p0300 randon misfire

Posted: Wed Oct 17, 2018 12:26 pm
by Archon
Coils are on the lower left. It also shows which coils are associated with what cylinder.

[The extension jpg has been deactivated and can no longer be displayed.]

Another view of the coils, to the right of the supercharger serpentine belt, and above the dipstick.

[The extension jpg has been deactivated and can no longer be displayed.]