Page 1 of 1
1995 pontiac bonneville se ICM change
Posted: Sat Aug 06, 2016 3:59 pm
by 614justin
How do replace an ICM on 95 L36?
Do i just remove ignition coils?
Do i need di electric grease?
Re: 1995 pontiac bonneville se ICM change
Posted: Sat Aug 06, 2016 5:55 pm
by J Wikoff
Yeah, remove the coils, and the screw in the middle of the wires on the harness that holds it on. Some dielectric grease on the contacts won't hurt.
Re: 1995 pontiac bonneville se ICM change
Posted: Sat Aug 06, 2016 7:02 pm
by Wes
It's a good idea to hit the aluminum the ICM mounts to with a wire brush, then put a very liberal amount of di-electric grease on the heat sink/ground. As well as a normal amount on the coil towers, and connector as mentioned above.
Re: 1995 pontiac bonneville se ICM change
Posted: Sat Aug 06, 2016 10:48 pm
by 614justin
Thanks. This a great site and service. Pure Americana, even if its made in Canada.