Page 1 of 1
Question about Napa spark plug wire part number
Posted: Sat Nov 21, 2015 10:58 pm
by kennyz
Does anyone know why Napa lists a different part number on their Belden wires for a 2000 than on a 2001 and up Bonneville?
Re: Question about Napa spark plug wire part number
Posted: Sun Nov 22, 2015 2:21 am
by MKMike
They are different wire sets in all brands not just in NAPA Belden.
Look at Rockauto.com and you will see.
Re: Question about Napa spark plug wire part number
Posted: Sun Nov 22, 2015 10:55 am
by kennyz
Is there a difference under the hood between the 2000 and the 2001?
Re: Question about Napa spark plug wire part number
Posted: Tue Nov 24, 2015 11:31 pm
by Roadrunner
I never payed attention to the different part #s until you mentioned it.
I bought the proper set for the 00 and the proper set for the 03.
The routing is same but I noticed that on the 03 the wires on the rear seemed to fit better - maybe slightly longer.
I just thought it was due to variation in brands.
Re: Question about Napa spark plug wire part number
Posted: Thu Nov 26, 2015 11:12 am
by kennyz
I just finished installing the Belden Premium wires specific to the 2000 and they were EXACTLY the same length as the original wires.