Page 1 of 1
power motor windshield wiper blown?
Posted: Wed Sep 23, 2015 6:48 pm
by blinky99
press button for windshield wiper, no sound, fluid eservoir is full.
also the lines that attach to the wipers borke in winter, any ideas how to re attach em, maybe the leak burnt out the motor since lines were broke? fuses seemed ok
2000SLE
easy to replace by ones self?
Re: power motor windshield wiper blown?
Posted: Thu Sep 24, 2015 10:02 am
by nos4blood70
I'm guessing the motor has burnt out. You can get a new one from Andrew on here.
Have the lines broken or just come undone?
Re: power motor windshield wiper blown?
Posted: Thu Sep 24, 2015 1:35 pm
by lunchboxx
The lines are pretty brittle after a while, I broke mine. This is definitely a job for Andrew (harofreak00). You can get the motor and the tubing from him. installation is pretty easy. The tubing will be harder than the motor in my opinion. There is just more to take off to get to it in the first place. You connect with Haro on here or through his website.
http://www.bonnevillesunlimited.com/
Re: power motor windshield wiper blown?
Posted: Sat Sep 26, 2015 12:23 am
by blinky99
i was just gonna put some kind of sleeve over the two broken line parts and glue/tape together,what about installing the motor unit itself?
and ya i know of haro suppose to send him my stereo to replace lightbulbs anyway guess this is a sign..
Re: power motor windshield wiper blown?
Posted: Wed Oct 28, 2015 5:02 pm
by blinky99
replced the power pump noise comes on, bit squirted out of blades,but again they are cracked and broken and nothing is coming out of either wiper blade,but the sound si back!
ez job to repalce pump motor, shop woulda charged 150 i bet lmao