Page 1 of 1

Shallow aftermarket receiver?

Posted: Sat Mar 15, 2014 8:57 pm
by IanRosean
Does anyone know of a shallow CD-less media head unit that is like am fm USB Aux and possibly blue tooth, that the depth is like super shallow like around 4 inches deep so I do not have to cut the plastic that is behind the stock radio? Any input is greatly appreciated, I am terrified of attempting to cut that plastic and something going wrong.

Re: Shallow aftermarket receiver?

Posted: Sat Mar 15, 2014 11:44 pm
by bobgto65
I have not seen one. But cutting out the back of the dash is not too hard to do. And it will not prevent you from reinstalling the factory radio later on.

Re: Shallow aftermarket receiver?

Posted: Sun Mar 16, 2014 1:05 am
by burger
Also you can get an a dash install kit that sticks out like an inch so you dont have to cut anything. At least it is that way for the older models.

Re: Shallow aftermarket receiver?

Posted: Sun Mar 16, 2014 1:47 am
by IanRosean
I have the 2000 bonneville SE. What kind of tools do you use to cut it? I tried manipulating the right on cable and it seems to be like right on that plastic back there so I'm super nervous. But like I said I don't need a cd player and would prefer a touchscreen with a shallow depth so I don't have to cut anything

Re: Shallow aftermarket receiver?

Posted: Mon Mar 17, 2014 12:12 am
by bobgto65
just use a drill with a 1/2 inch bit and drill holes around the back next to each other until you cut out the whole back. A dremel tool may also work.

Re: Shallow aftermarket receiver?

Posted: Mon Mar 17, 2014 12:27 am
by repinS
I used a hacksaw blade.

Re: Shallow aftermarket receiver?

Posted: Mon Mar 17, 2014 11:26 am
by gweg_b
I had a friend help me. I removed the vent next to the radio and stuck my hand back there to hold the ribbon cable while he used a Dremel (yes, we were being careful with my hand, too). Took probably 5 minutes to complete.

I later went back in there with that Dremel to open up more space on the right side for hiding cables.

Re: Shallow aftermarket receiver?

Posted: Wed Mar 19, 2014 4:08 pm
by IanRosean
I purchased the gmrc 04 and I just ordered a mechless head unit that is only 3 and 5/8th inches deep so problem solved lol

Thanks for all the input though guys

Re: Shallow aftermarket receiver?

Posted: Wed Mar 19, 2014 10:15 pm
by DaMaroon
Did it have a screen/ touchscreen? If so what is it?

Re: Shallow aftermarket receiver?

Posted: Thu Mar 20, 2014 11:28 am
by IanRosean
No it didnt have a touchscreen it was a cheap Boss 614UA for $19 bucks on walmart.com, its all I need though because it pushes 50w to each speaker and i'm just gonna plug in my phone to it.

the only touchscreen I know of that will fit in our bonnies is the parrot asteroid which is like $499, im good on that hahaha