Page 1 of 2
Headlight Haze
Posted: Mon May 07, 2012 10:46 pm
by RogueSSEi
I was going to fix a "headlight haze" problem on a 99 VW Bug. I'm not much on kits, would prefer to start with a base 500 grit wet, 700-800 wet then a 1000 wet sand, my question is which polish to use? What has anybody been using that actually seems to "work", I know all "work" but who has found which brand/polish to be more effective?
Re: Headlight Haze
Posted: Mon May 07, 2012 10:49 pm
by 01bonneSC
Meguiers plast-x. I'd ramp it up to 1400-2000 with the grit
Re: Headlight Haze
Posted: Mon May 07, 2012 10:50 pm
by SSEiMan01
I've gotten pretty decent results with PlastX on a heavy cutting buffer pad. I can bet it would be great with sandpaper too.
Re: Headlight Haze
Posted: Mon May 07, 2012 10:52 pm
by 01bonneSC
All my polishing has been by hand, so yes any sort of mechanical assistance will give it that little extra glint.....Dammit I need new headlight bulbs and a polish lol
Re: Headlight Haze
Posted: Tue May 08, 2012 7:41 am
by Grimm
Just remember that with sanding you will probably be removing the UV protection, so you'll have to religiously keep them waxed or they will haze again quickly.
Re: Headlight Haze
Posted: Tue May 08, 2012 10:09 am
by Mad Myche
Hobby store for the ultra-fine sandpapers in the 2000 - 3000 range.
Mothers Mini Power Ball for rubbing & polishing compounds.
Re: Headlight Haze
Posted: Tue May 08, 2012 10:13 am
by 1oldman
Mad Myche wrote:Hobby store for the ultra-fine sandpapers in the 2000 - 3000 range.
Mothers Mini Power Ball for rubbing & polishing compounds.
I second this as this is what I've done. - BC
Re: Headlight Haze
Posted: Tue May 08, 2012 10:31 am
by 00Beast
I had good luck using 1000, 1500 & 2000 grit paper, then using my polisher and pads, but a powerball and some Plast-X will do the second part well also. Be sure to use a good wax/sealant on them to keep them nice for a long time.
Re: Headlight Haze
Posted: Tue May 08, 2012 12:52 pm
by RogueSSEi
Thanks guys for the advice!

Re: Headlight Haze
Posted: Tue May 08, 2012 2:12 pm
by Grimm
Go to Autogeek and do a search for spar urethane. I need to polish mine some more. I might try this technique if they don't come out good enough.
Re: Headlight Haze
Posted: Tue May 08, 2012 10:28 pm
by Skippy1827
1oldman wrote:Mad Myche wrote:Hobby store for the ultra-fine sandpapers in the 2000 - 3000 range.
Mothers Mini Power Ball for rubbing & polishing compounds.
I second this as this is what I've done. - BC
I third it.
But I also used Turtlewax lens polish kit that worked..
Re: Headlight Haze
Posted: Tue May 08, 2012 10:39 pm
by nos4blood70
Toothpaste is pretty good too.... lol
Re: Headlight Haze
Posted: Tue May 08, 2012 10:56 pm
by RogueSSEi
nos4blood70 wrote:Toothpaste is pretty good too.... lol

Carl, you so silly lol.
Re: Headlight Haze
Posted: Wed May 09, 2012 12:51 am
by 01bonneSC
RogueSSEi wrote:nos4blood70 wrote:Toothpaste is pretty good too.... lol

Carl, you so silly lol.
Its true. Toothpaste is gritty(ish).
Re: Headlight Haze
Posted: Wed May 09, 2012 1:06 am
by xrob
01bonneSC wrote:RogueSSEi wrote:nos4blood70 wrote:Toothpaste is pretty good too.... lol

Carl, you so silly lol.
Its true. Toothpaste is gritty(ish).
lol...any particular brand
Re: Headlight Haze
Posted: Wed May 09, 2012 9:06 am
by Mad Myche
01bonneSC wrote:RogueSSEi wrote:nos4blood70 wrote:Toothpaste is pretty good too.... lol

Carl, you so silly lol.
Its true. Toothpaste is gritty(ish).
Good for CDs (& DVDs) too!
Re: Headlight Haze
Posted: Wed May 09, 2012 9:14 am
by RogueSSEi
xrob wrote:lol...any particular brand
Crest... 9 out of 10 Dentist recommend
Re: Headlight Haze
Posted: Wed May 09, 2012 9:35 am
by SSEiMan01
Re: Headlight Haze
Posted: Wed May 09, 2012 8:18 pm
by deano55
does this mean rubbing compound works good on teeth?
Re: Headlight Haze
Posted: Wed May 09, 2012 9:11 pm
by SSEiMan01
I don't think I would volunteer to test that one...