Page 1 of 1
GXP Front Bumper Cover on an SSEi?
Posted: Thu Dec 22, 2011 1:25 pm
by mthedude
Would a GXP Bonneville front bumper cover match up and fit a 2000 SSEi?
Just cusious. I like the GXP's looks better and mine needs re-painted anyway.
Re: GXP Front Bumper Cover on an SSEi?
Posted: Thu Dec 22, 2011 1:28 pm
by nos4blood70
It should. I've seen people with them on. Although the problem would be finding one! Let alone same color.
Re: GXP Front Bumper Cover on an SSEi?
Posted: Thu Dec 22, 2011 2:53 pm
by harofreak00
Yes. You'll need to get the support foam behind the bumper, along with the front bumper extensions (wheel well), and front wiring harness (foglights are different).
I wouldn't expect to find one cheap. If you can find one under $300 I'd be surprised.
Re: GXP Front Bumper Cover on an SSEi?
Posted: Thu Dec 22, 2011 2:59 pm
by PLAGUE PHANTOM
I think it wont look right unlesss you got the gxp cladding to
Re: GXP Front Bumper Cover on an SSEi?
Posted: Thu Dec 22, 2011 3:11 pm
by 01bonneSC
the inboard foglight are much better looking than the GXP ones. Makes an SSEi....we an SSEi.
Re: GXP Front Bumper Cover on an SSEi?
Posted: Mon Jan 02, 2012 4:03 pm
by xrob
harofreak00 wrote:Yes. You'll need to get the support foam behind the bumper, along with the front bumper extensions (wheel well), and front wiring harness (foglights are different).
I wouldn't expect to find one cheap. If you can find one under $300 I'd be surprised.
The foglight harness is not needed. Its the same.
Re: GXP Front Bumper Cover on an SSEi?
Posted: Mon Jan 02, 2012 6:21 pm
by 00Beast
The foglight harness is most definitely not the same, this is coming from someone who has replaced many a foglight in the GXP. It is a completely different style to go with the projector and H3 bulb, the whole back cover of the foglight IS the plug.