Page 1 of 1
tire preesure on dic
Posted: Sat Oct 03, 2009 2:25 pm
by lynn37
low pressure keeps comming on even tho the pressure is ok. i have had this happen before but i don't remember how to cancel it.
Re: tire preesure on dic
Posted: Sat Oct 03, 2009 2:27 pm
by 00Beast
Press and hold RESET until it says normal, usually 10-15 seconds.
Re: tire preesure on dic
Posted: Sat Oct 03, 2009 8:11 pm
by Archon
Pressing the reset will just reset it for that ignition cycle. The next time the car is started, the tire pressure warning will display again. Keep pressing the select button, until "tire pressure low" is displayed. Now, hold the reset button until "reset" is displayed. That will take the 10 - 15 seconds. After releasing the reset button, the tire pressure should display "normal".
Re: tire preesure on dic
Posted: Sat Oct 03, 2009 8:31 pm
by 00Beast
Oops, that's what I meant. Thanks Archon for clearing it up.
Re: tire preesure on dic
Posted: Sat Oct 03, 2009 11:08 pm
by In_da_boondocks
You may also have some dirt stuck by one of the sensors. I to me, it seems that going through a carwash and having an underbody spray done keeps that under control.
Re: tire preesure on dic
Posted: Sat Oct 03, 2009 11:16 pm
by 00Beast
Or a WSS could be bad, or have a bad connection. If the ABS lights, or the traction control lights are on, that might mean a bad wheel speed sensor (WSS). They tell the DIC the tire pressure through comparing the rotation of the tires.