PontiacBonnevilleClub.com

Dang!! I want a cam install like that!!!

driverjohn2005 wrote:This is gonna kill me that I'm not there...

Have fun guys!

Wish you were here, Brother John. Katie was bummed too. The two Series 1 victims aren't here yet, and your wrench would be a huge asset. ASSet.

Here's a few:


2000SilverBullet and myfirstbonnie in 2k Cam teardown (Paul and Matt.....lottavaginamatt)




Jordan (vbcspangler)



Matt and Paul












Not the first L67 to suffer this fate here:




(actually, this is the second of 3 Bonnevilles of Matt and Wendy's that got gutted here)



Grizz's seats and Matt's parts




Matt's 2k just about to the Camshaft




Recently ressurected Zilla and VBCSpanglers 'swapped' Toronado



SLEeper and Matt's 2k


Grizz


Grizz already had a dogbone swap and a bypass hose replacement. Now seat repairs. Zilla's LSD was already done, and we're waiting for the other two cars to do rockers on one, and a SC coupler on the other.

John just rolled in aside Christine with a box of shiny 1.8 rockers.......6:30am this morning!

If you want a good laugh while those seats are out...inspect all the motors. The one that doesn't have enough power (recline one) is made in Korea while the others are made by Delco. Amusing eh?

I finally got here, woke everyone up while trying to break in at 6am.

I tried to get here last night but when the road line started moving I decided to stop for a few hours shuteye.

6 hours later I hit the road again, the front seats are not bad for sleeping in when fully reclined.

you guys work fast

Parts are in the parts 'washer' (4 valve covers and a LIM). Rockers are going back (new 1.8's) on John's car, and the subframe is dropping on the 2k for the cam swap.

EDIT: Cam is out. I'll get some pics. Subframe had to drop about 5" after we fabbed a 'cradle' to support the engine on the subframe before lowering.

EDIT 2: Subframe is back up, motor mount going on. Still have to install the oil pressure kit and new water pump, then the rest of the reassembly. John is done with the rocker install on his car, and just waiting for squeaky-clean valve covers to come out of the parts washer. We're going to grab some lunch first.

Man, wish I could have made it. Nice work guys.

John's freshly 1.8 rockered car is idling and pumping oil up into the valvetrain. Quiet as a purring kitten locked in a dark closet........from next door. Squeaky clean valve covers too.

2k cam job is still slowly going back together. Valve covers just finished baking from wrinkle coat, LIM is in the wash ready for port matching in about an hour. It COULD fire up tonight, but we're not going to rush it. Boss455 and his Wife will be pulling in around 4pm for a supercharger coupler, and we'll have two torn apart again.

Ripping right through every job and more.

Is it an L36 LIM???

Mark

No, but yours gets done with the 2k L67 LIM. First *dang* free time I've had in months.


"I have to skip work, there's 6 people at my house and 2 of them are Canadians!"


Boss455 just showed up from Idaho. Ray is in the house. Katie's here now too. I think there's about 10 people? Wendy's Dad (Matt's pop in law) has a birthday today also. So we decided to drink beer.

*dang*, You guys are working on cars and drinking beer.
I am at work as we speak, thinking of beer, wishing i could work on my car. Yeah, I'm jealous!
Looks awesome guys! Nice work Thus Far.

[quote="willwren"]No, but yours gets done with the 2k L67 LIM. First *dang* free time I've had in months.


You've made a *shoot* day better Bill.

Mark

Awesome work so far guys!!
Wish I didn't have to work in the morning and was enjoying some suds with you

Have a beer and stogie for the old guy......sniff

can't type with gloves on so all i can say is we're heating up now and the bveer and oil is mixing now!!!!

Tearing down Boss455's car now, he's taking the SLEeper back to the hotel tonight.

Matt is swapping valve springs, retainers, and locks now. Almost done with the front bank, then we're cleaning up for dinner. All other car work is done.


....update. Front bank is done. Wrapping up for the night, heading to china buffet.

MORE PICTURES!

More pics after we eat, rags! We'll get a bunch up tonight. Including some very embarrassingly classic ones that will live in infamy.

Give us a spring break guys, the pic will have to wait until after dinner.....as long as I can still see the monitor.

I love the smell of grease on my hands mixed with the smell of good beer.