PontiacBonnevilleClub.com

what's the charge for the airbox (so I can shake my piggy bank ahead of time)?

crud, it would have been my first meet. It is too close to Easter, and I need to be in Menasha Saturday eve. I am so close!

jovan jovan jovan!!!

you won't need that

Buddies birthday extravaganza is that night so i am out.

SLEighride03 wrote:what's the charge for the airbox (so I can shake my piggy bank ahead of time)?

I would say $25 or $30 would cover the Plexiglas. The other hardware perhaps under $10. Then if you need the air duct I have some on the shelf, I think that was $10 a foot and you only need a foot. Unless you have your own. Then all you need is a filter with a 4" outlet.

Hope these maps help everyone make the trip. They will be ripping up the road in front of my house starting this week. But I was told you will still be able to get threw. Remember, my hose is on the right and set back from the road. These maps should help. These maps do not show the roundabouts.

They decided to start ripping up the road in front of my house this week. Not to worry, you can still get here even though the signs will say road closed. You will need to go around several barricades, including the big one that says road closed. Just go around it on the gravel and go forward. If you run out of road you missed my house. Right after you go around the big barricades there will be a road on the right, turn right and then turn in to the very first left (driveway) the driveway will fork, go left. I'll try to make a video of what you will see.

Screw it I'm coming through Blues Brothers style, smashing through any roadblocks in my path as full speed.

Dang, Work won't let me off :(

Take a bunch of pics!

The road in front of my house is ripped up. Please use this detour. You will leave the intersate and head in to Sheboygan, at the first set of lights (hardies on left) turn left. Follow that road a little over a mile and watch for Playbird road. Turn left. Go over I43 about 3/4 miles. You will come to some gravel, this is where the road is ripped up. last driveway on right before stop sign is me. Take the left fork and go up to the parking lot.

You got a garage full of tools I assume? So I don't have to haul all mine up there.

Got lots of tools, just bring and special tools you might think will come in handy.

Well, had a good turn out, 10 or 12 cars. Got a lot done.

Got the shop all ready.


First to show up, a local GP, this car sounds hot.


Then another local GP, he wanted a pulley swap.


A few more showed up.


Nice engine.


Installing a FWI


Still working on the FWI


My car looks lonely. Parked it there so people knew where the meet was, it worked.


Exhaust work.


Kyle doing some tuning. How much you think this tune cost him?


Some random shots


More exhaust work.


Still working on it. Hey, has anyone seen Kyle? He's been gone for a while.


To answer those questions, $187, and now we know where he was.


Some videos.

*dang*, i can't read it but that looks like a ticket. How fast?

74 in a 55 I think he cut him a brake. He had been doing a bit more then that.

sorry, i would have showed up, but i had easter lunch/dinner with the family today...... we'll have to meet up sometime though......

Dan, thanks for hosting and had a great time.

my pics to follow shortly.

thanks again for everything dan, and my exhuast leaks, and i'm throwing that darn 2nd o2 sensor code!

SOB. I've talked way to much crap about others tickets and got pulled over for going 70 in a 45 allegedly and got written up for 65 in a 45. See you at traffic school Kyle.

Some random photos I took: first up Dan's car



Some of the cars



Ceramic coated Headers....looks really cool

rear of car the headers are in

more various shots

couple of stuck up GP's in the corner...jk...the guys where really nice

nice rims on this Bonneville


my car topless


ride home no hood view....oh and I made it Dan....didn't get pulled over