Wow!! This looks like a huge pain in the ?!@# , maybe ill just leave the vise grips where they are Lol!! Thanks guys for getting back with a answer, appreciative as always..

brn,

Hello all! Havent posted in awhile so please forgive!! My ? is. On a 92 bonn! to replace the cast bracket that holds the signal arm does a guy have to remove the wheel or can it be done without? If so wht about the airbag going off??

O.K. it must be a strut then??

Would anyone be able to shed some light on what kind of shock is on the rear of my S.E. bonneville, is it air or is it a full strut type??? It looks like it's a spring and a shock on the outside , I just had a quick look under so maybe not...

Thanks ,Guys

Yah i guess it would like rocks and roadkill!!!!! Well i didn't put it back on but i think i'll just pull the balancer off one more time and put her in,the sensor is pretty well set in position now and it runs good so pulling the balancer one more time shouldn't disrupt it. Thanks again for the info ...

Hi there.. Yah that would work i might even have to put the balancer back on all the way and try it and listen if it's rubbing.. could i just throw the plastic shield away or is it needed??? Thanks again.. :) What I did was find a piece of scrap material that fit the gap between the sensor and the ...

Hi there guys back for some more punishment from the old car!!!! Well i attempted to change the crank sensor tonight and thought i had the new one lined up pretty good from the old one and while tightening the balancer back on SNAP!!!! i assumed it was the fins on the back of the balancer didn't ...

It sounds like you have it narrowed down to the crank sensor.

I'm not sure what's going on with the starter staying engaged. The crank sensor wouldn't have anything to do with that problem. You may have a bad starter or ignition switch. Yah it's kind of weird even if you turn the ignition off it ...

i posted a problem with my 92 bonneville not starting after running and going to start it and it just turns over and over and sometimes the starter stays ingaged and kills the battery. Well i thought i would try this.. I let it warm up really good even took it for a ride and then turned it off,of ...

Sounds like it is the crank position sensor. It gets the spark reference from a ring on the harmonic balance. Check the connection down by the crank pulley. O.k> i will give that a try . when i was outside last night and trying to start it while it was hot and thought to grab the air gun and put ...

I have a 92 bonneville that won't start after runnung for a while. It just turns over and over and won't fire up there is no spark while turning over either. i am getting a 17 code and a 21 code. It should still fire up with the 17 code but the other one maybe not. i believe the 21 code is spark ...

Well thanks for the replies guys... I did replace the magnet and put some jb weld on it let it sit and took it for a drive. I also replaced the cam sensor and then the service engine light went out. I took it for a rip but it died on me again tried to start it but nothing. Like it wasn't getting ...

Hi there guys haven't posted here in a while, just wondering if any gearheads would know if this could be fixed. I have a 92 bonneville that recently has been dieing out when it warms up. it was throwing a 41 code which is cam sensor i believe. I had a look at the cam sensor hole and the magnet ...

hi fellow bonnies back again for another one!! There used to be pictures of how to replace a wheel hub on this site awhile back and i can't find it anymore . My car doesn't have abs so i don't know if is any different ???

Thanks Dan.I

O.k. i took another stab at this problem today with another angle. I went to princess auto and bought a set of spark plug wire testers and started checking out each wire. i came across one wire that would lite up when started and then when it would die out after a bit. it ended up being the 2-4 coil ...

Hi there sorry for the delay in response. As for the first question. I haven't checked the fuel pressure bleed down i will check that first. And for the second. tha cat has been cut out awhile ago so that's ruled out. i'm wondering if it could be either the cam sensor or the crank sensor???. What do ...

hi there i have a 92 bonneville s.e. that has been running like total crap for about a good year now it idles bad and when your driving it backfires,and seems like it is starving for fuel. ive changed everything from coils to o2 sensors,pcv valve,spark plugs wires,maf sensor ect,ect,. Does this year ...

Alright !! Well i think that should get me started anyways i shure appreciate the info i'll let you know how it went and if i left any skin and blood in the process..

Thanks again. Dan .i

Hello there iam a previous member of the old site and iam wondering if someone could post how to change out a balancer on my bonneville the old site had some pretty good posts of how to do it but i can't seem to find any on this new one. Any help would sure be appreciated.

Thanks, Dan.I