Well I got it started! After I put the ICM on it was just flooded from trying to start it before. So after about 2 min of hard cranking with the gas to floor she purrs like a kitty now.

Well O'Reilly tested the ICM, did the test 3 times and it failed all 7 tests that it runs. Seems weird but you plug it in then you find a ground source and he was using the unit as a ground so hopefully that didn't effect it. So I am guessing that is the problem


common problem with these Icm's ...

Well O'Reilly tested the ICM, did the test 3 times and it failed all 7 tests that it runs. Seems weird but you plug it in then you find a ground source and he was using the unit as a ground so hopefully that didn't effect it. So I am guessing that is the problem

when u try cranking it over does the rpm gauge moves when cranking ? if its getting spark it will jump from 0 to 100-150 rpm with the cranking . if it does not move 9/10 its a ICM .

Sounds to me like a ICM failure . take the ICM off and have it tested at a auto parts store that test them .

( Note ...

I just sprayed starter fluid in the intake hoping to get at least something and nothing. Pulled the plug wire from #6 on the coil pack and got a arch...

I have a 2002 Bonneville SLE which has 150k on it. I have had it about a year and half and put a walker CAT on it right after i bought it because it was clogged. Also, replaced the MAF about 6 months ago with a reman. So all has been good until Monday morning 2 days ago when i was driving and all ...

I just thought I would leave the comment relating to the blowers. If ordering of RockAuto, go for the Delphi replacement. It might be 15 bucks more than the cheapest one, but at 45 some dollars shipped it is a quality replacement and it is very quiet. Just put one in my car.

Agreed. As did I. The ...

I hope you got the right one. Mine was the bm00015. I got it from rockauto. The factory one out of mine was a Delphi and I am guessing that came from factory like that.

Well I got the blower out and to my surprise it was a Delphi part and I realized mine is the gen 1. 2000-2002 is gen 1 and 2002-2005 is gen 2. I guess they did a mid year swap or something but mine sure was the black gen 1. So I am now waiting until the other one gets here in 2 days and have sent ...

What about Delphi parts. It is about $75 cheaper.

Would you go with the ACDELCO?

My blower has been going out over the past few months. You could give it the ol kick and it would be good to go for awhile but you could hear it making the inevitable noise. My question, after some research i have found 2 gm part numbers and from what I have read it depends on if it is a first gen ...

I wonder if Haro has any laying around? I'm gonna check it out tomorrow. You say its under the cowl connected to the wiper arm?

Got a couple inches of rain last night and my wipers suddenly wouldnt turn off. Either High or Low speed, no intermittent. I pulled the fuse to get them to shut off and today i put it back in and the wipers are fine. I would put money on it, it is probably this. I just bought this car 2 weeks ago so ...

so did you just tint your signals? that looks great. may have to do that to my burgundy bonne. I think on my color that would look better than clear

I know i used the 3m headlight restore kit and it was amazing for the $20. Mine were yellow and so oxidized when i bought it i could barley see at night. That kit made them look new again i couldnt believe it,

well i went with a walker direct fit had the rear of it welded on. Works Great no SES light and fixed everything

well they didnt have the magnaflow in stock anywhere it was special order. so my brother works at advance auto so i got the walker direct fit for 150 with his discount. Took it to the local muffler shop paid 50 bucks to have it put on and now it runs great!

the walker and the magnaflow are both bolt one with one side welded. the difference is about 100 bucks. 180 for the walker. 280 for the magnaflow

magnaflow uni 51027, direct fit magnaflow 46204, or walker 16386. the 2 magnaflows are suppose to be the OEM grade catsmart that is suppose to be obdII compliant. Also the walker ultra that i listed is also suppose to work pretty good with obdII. I have narrowed it down to those