Totally understand, this virus is really putting a hurt on us. Definitely a good idea for a fused jumper...spark or short, or anything of that nature is obviously not good near fuel or vapors. This has got me wondering though, if the pumps electronics have gone bad, essentially not making a complete ...

You could try to run a direct hot wire 12V to the pump and see if the pump turns on, if not then, replace the pump.

I looked on the ZZP site and they claim the inside diameter of the factory downpipe from the manifold to the cat is just a little over 2". Hope that helps

Sorry you're having trouble, I know the feeling of having to greatly rely on having one car. Sounds like you started with the right things to check and switch around to isolate it to cylinder #4. I dont think you could have accidentally put the wrong wire on the wrong plug if it ran fine after ...

I definitely learned about hub centric rings the hard way in my younger days lol. Of course right now I have them on rings to bring them down to the 70.3 mm hub.
You got it, it has been a Cali car its whole life, it was first sold to and owned by a guy in Los Angeles and then somehow made it to a ...

I just did mine today, after you do it once or twice it's pretty easy just by feel. The front 3 are really self explanatory so you got that. With the rear 3 I usually stand on the passenger facing forward and use my left hand to reach under the alternator and go forward til you feel the first boot ...

Welcome to a new member from a new member !
I would definitely start by making sure the car is in the best mechanical running condition first, then go with a fenderwell intake from intense to start with, you'll love the sound

Thank you guys, it took me a long while searching for the wheels I thought would look best on the car.
They are Avid1 av30 in 17×8 with a 38 offset and 73.6 centerbore. They only had a 5×114.3 mm lug pattern available, no 5×115mm. Luckily havent had any problems or vibrations with that lug spacing

https://i.imgur.com/9W6Kd4g.jpg
https://i.imgur.com/5Db7Afk.jpg
https://i.imgur.com/TJDVdMJ.jpg
https://i.imgur.com/HkWv7yx.jpg
https://i.imgur.com/A3s1i7D.jpg
https://i.imgur.com/3EiQalH.jpg
https://i.imgur.com/885Dqiw.jpg
https://i.imgur.com/gTlkpLy.jpg
https://i.imgur.com/lu3hKF6 ...

+1 on the radiator support brace, 4 15mm bolts to remove and you also might need to move the airbox out of the way to get to the most driver side bolt. it also eased my process to remove the fans first

https://imgur.com/9W6Kd4g
https://imgur.com/5Db7Afk
https://imgur.com/TJDVdMJ
https://imgur.com/HkWv7yx
https://imgur.com/A3s1i7D
https://imgur.com/3EiQalH
https://imgur.com/885Dqiw
https://imgur.com/gTlkpLy
https://imgur.com/lu3hKF6

Hi to everyone on this forum, i have just made ...