Ya, it didnt come with ANY fittings or instructions...and sorry about the old thread revive.....Next time ill start a new one. Thanks for the info too!!

Ok, I ordered a new radiator from Rockauto .com, everything matches up EXCEPT the Tranny cooler lines, the openings on the new radiator are too *dang* small for the original lines to attach to. Do they make an adapter? My lines are in good shape, so i dont want to replace them, please advise. My ...

Thanks again, that fixed it!!!I think I need to change the HB next, but well see. Thank again guys i really appreciate it.

Thank you VERY much, im going to pick one up now.

Ok, I got the compressor off finally, and a by-pass pulley put on. Now the belt is out of line on the water pump because of the by-pass pulley, it pulls the belt toward the engine side of the water pump pulley. So, Even though i already bought the darn by-pass, do you all know what length of belt i ...

Thanks for the information, have you replaced your plugs and wires if so, what have you found is the best plug? I used to have a 90 Lumina that I put a flowmaster and sounded like a mild v8 after, so I may do that too.

Best plug...personal opinion is anything that lights the mixture. I go with ...

Thank you for all of your help, I will try to get this tackled this week. Updates later.

Ok, i checked the rubber on the Crank pulley, its fine. I pulled the belt off and started it and let it run for about 8 seconds to see if i could hear that noise. It still sounds like lifters but from the bottom/ back of the engine. I did notice though, as i decided to check ALL the pulleys while i ...

Rubber????? I know about the Fram, sorry, i didnt read about it until it was too late.

Yes, kinda, here are some vids i took tonight
. i think its that AC pulley, but i can also hear what sounds like a slight lifter rattle toward the bottom of the engine. Can that pulley be tightened? Or just replaced?


http://i733.photobucket.com/albums/ww331/gry8ruth/th_bonnienoisewac.jpg

http ...

Ok, so im at the drive through last night, and i hear what sounds like a combination of an exhaust leak, lifter rattle and spark knock. it does it whether its in gear or not. i pulled it up on the ramps last night and it sounds like its coming from the oilpan area. i dont have clue as to what it ...

Hate to revive an old thread but did you all ever figure out the cause? I started hearing this tonight, it almost sounds like a lifter rattle, but coming from the bottom of the engine. Any guesses???, ill take a vid tomorrow. Mine has 124k on it, dont know if the timing chain has ever been replaced ...

Ok , my 91 has the coil pack that looks like 1 solid pack, the coils on the 88 looks like the newer 3 individual coil design. even though there in different places in the engine bay and the 88 is a diff engine can i put the 88s coil pack on the 91? or am i better with what ive got? ill take picks ...

Hey all, my name is Gary, I just bought a 91 Bonnie LE w/ 125k on the ticker, and i also bought my Grandpas 88 Bonnie LE for parts thats been sitting for over 10 years. Im using the body panels and other things off her. Ive noticed that there is ALOT of info on these boards, and being a member of ...