I just bought a factory service manual, so if anyone needs info from it let me know
Hi. Replaced ISS and steeringwheel sensor at the same time but am left with a small
black male connector with two wires.
1- black and checked out to be a wire to ground.
2- green wire with a yellow tracer.
I ...

Tried to lube the ISS without removing it from the car by spraying in some litium grease via a small diameter hose about 3/16" clear plastic tube, worked and reduces the problem a bit.
Had to remove some covers as explained later and cut the black rubberlike cover all the way lenghtwise and removing ...

OK, I need some links about the IM shaft. I was just out to the "other" Bonneville site and it is down (what's going on there? IDK), but there were part numbers and links that I am going to need to repair this issue on the 03 SSEi. Any one help here?

The P/N for the 2003 Bonneville SEEi ...

The wheel speed sensor is part of the hub assembly, the connector on the hub. Not removable or replaceable separately. I used a Timken 513179 hub on my 03 SSEi and has been great. Your 2000 will take a Timken 513121. I believe the difference is how the connector clips in. Only 2000's take that one ...

After checking the harnesses, if I need a WSS would this fit the bill?

http://cgi.ebay.com/ebaymotors/SPEED-SENSOR-pontiac-BONNEVILLE-2000-99-2005-2003-2002-_W0QQcmdZViewItemQQhashZitem1e5bcf8f2bQQitemZ130389348139QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

I thought I'd have to replace the ...