your right...i put monroe on the rear......and they do feel a bit firm....yet its alot better, no more of the whole rear bouncing and feeling like my tires are going to be pulled off the back from bouncing so hard left and right when i hit a bump....thats gone atleast

I need some rear shocks as well....Auto zone sells Gabriel Hi Jackers ,.......there $71 a pair..... no good?? whats good and fairly inexpensive yet not to cheap
thanks

PROBLEM SOLVED:...i bought a new MassAirFlow Sensor and cars running 2 days strong, no stall. .......I did not want to spend $140 on the MAFsensor and it not fix the problem, as was what happened to my Dad's 96 SSEi, his code said MAF, turned to be the Computer was bad.....yet buying a new sensor is ...

sorry, i thought i was making a new 'subject:' cuz even though it is related to the problem of stalling....the RPM's gauge never did this before.......Could this be an alternator problem??

after i start the car...after a few seconds, the car acts like its gonna die... the rpms' rev up to 3..then it drops off to under 1...then revs back up to 3, then back down....feels like its gonna die, till i rev the gas a bit. This does this at a stop light when sitting sometimes too. The car will ...

So me and my dad cant figure it out.....I called walmart who has the battery for a regular bonneville, but not the ssei.........Were not sure, did they make the SSEi the only one with batteries under the seat and keeping the sse and down under under the hood.....but your saying there all the same ...

hey thanks, im gonna check these out....hey since the car wouldnt start a couple times, im assuming i need a new battery.... can i buy a battery that is used for a regular Bonneville.....cuz walmart has a regular bonneville but not for the ssei....i just dont want to spend $130 at autozone....any ...

so since i unplug the sensor, and it almost seemed to work better for a few miles, Not plugged in, then started stalling again... that means if it runs better unplugged or about the same when plugged in, i have a bad sensor? I dont want to take it to the dealer, but i dont want to but a sensor and ...

I disconnected the sensor....the car still ran, then i drove it disconnected. then after driving about 20 miles...it stalled again,when i broke or turned into a parking lot, being disconnected. im taking it to a dealer to have them diagnosis it. I dont want to spend $90 to tell me its a battery ...

...so disconnect and reconnect the sensor, then try to see if the same problem exist?...

..or disconnect and try running without the sensor connected?...

dosent make sense or i dont get it, if it was disconnected while trying to drive, wouldn't it act the same as if it were connected being bad

Yes i have had the TCC code come up before....im thinking thats whats causes the car to Buck inbetween gears, which has not been happening recently....yet this is a different problem im thinking with the stalling............i just had autozone run a code and what came up was the 'Mass Air Flow ...

The car stalls when im coming to a stop/slowing down hard/making a turn. When im about to approach a stopsign/light, if i throw it in neutral and coast to the stop...the car does not die. When i am slowing down to make a turn, the car dies and i lose stearing....my battery light comes on as well. If ...

yup ...car was aligned after adjust links were put on.....and i figured since its still doing some crazy *shoot* in the rear, it was probably the shocks, or one really bad one.............thanks for the replies guys

-2000 SSEi-
-I just replaced both my *Rear-Adjust link bars*

** http://www.gmpartsdirect.com/catalog/frameset.cfm ** (#5 & #6)

-when driving my car over any large crack in the road, it feels like it kicks the rear left, (bounces left..right a bit),...when on the highway its worse.

----Will new ...

trying to pass echeck and the P0742-Torque Converter Clutch Circuit Stuck On code comes up....as well as after the car has been running awhile, when its shifting gears, it bucks hard , when this happens, I have to be easy on the gas when i know its about to shift....im thinking the code and this ...