Anyone experienced this?
My Bonnie sat with a completely dead battery for a couple of weeks, After using a jump pack to start the car the blower motor doesn't work.
i don't hear any sounds when I adjust the climate controls including not hearing the AC compressor turn on when the button is pushed ...

So at about 91k miles, I suddenly developed a ticking that shortly develop into a knock. I changed the LIM gaskets some time ago, so oil contamination should not have been the culprit. We pulled off all the belts and ran the car to eliminate extraneous noise and it seems the noise is coming from ...

Found this awesome tool some time ago. Lets you see what your car would look like with different wheels, lowered,painted a different color, tinted windows etc.
http://www.autowaretech3.net/nextwheels/perfplustire.htm

How about you guys show everyone what you like ;)

Lemme get this party started ...

GXP wheels are 18x8. The key to making 8.5" work will be the offset of the wheel you're considering. Too low and you hit your fender, too high and you won't clear the strut. If you were to err on a different tire size, I would go in the direction of slightly shorter than stock.

Hub-centric rings ...

Provided you either have the right hub diameter or a hub-centric ring, you can use 5x114.3 with no issues. A 20x8.5 might be a little wide though. Stock wheels are 7" wide.

unfortunately the aftermarket wheel choices are slim when it comes to 20x7". when searching for wheels online all sites say ...

will cause no problems at all i have been doing this for 7 years now. little tweak with hp tuners and speedo will be fine as well. yes i know my rear is sagging... lol new shocks are on and the sensor is on the way :)

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc6/247501_1583611730048_1828385807 ...

Around 70k miles my 02 was doing this (felt like the rear or the car was swaying left to right when i hit a bump) about 5k miles later i hit a lager hole and snapped the right rear shock in 1/2. upon inspecting them after removal i discovered they had been blown out for some time. Once replaced she ...

thanks for the info guys. i expected it to affect the speedo that's why i chose a size close to the original OD

I have have decided it's time for a wheel upgrade. I plan on going with a 20x8.5 rim with 245/35/R20 tires all around.
Here's a link to a tire height chart http://www.wheelcityusa.com/tires/chart.htm (VERY USEFUL)
original tire is 235/55-17 making the height 27.18" the 245/35/R20 is 26.75" will ...

Thanks for you input guys. i'll start by getting it scanned.
I have doubts that the ignition is bad. the car only has 80k miles. seems kinda premature for that part to wear.

Okie Dokie... got a new problem... lol

The other day while driving i noticed on my dash it said "SERVICE SECURITY SYSTEM" it was on for a few min then went out.
Went to leave the store and when i turned the key it did NOTHING. i turned the key back and forth, on and off and removed it and it ...

Headlights looks a lot better than the orange. NICE! :btruestory:

Ironically i have my lights out of my car now and was thinking of doing exactly what you did (tint the orange) but i decided to do something a little different. I had to order some materials so it will probably next weekend before i ...

Mission accomplished i used a plastic bondo spreader to protect the paint on the fender and pryed with a flat headed screwdriver while someone else pulled. :btruestory:

ps: it's the housing that broke (the plastic ear with the metal clip that the actual bolt goes through)
http://www.shotpix.com ...

ok,, after lots or prying, pulling and muscling i got the passengers side off but the only thing i have accomplished on the drivers side is to break the housing where right bolt attaches (thank god for JB Weld). That MFer don't wanna budge. i just sprayed some PB Blast back in there, gonna take ...

Thanks for the help and the link.
My lights are shot. they have tiny cracks in some spots.i have wet sanded and polished them in the pasts (while on car) and they clean up well (become transparent again) but no way to sand out cracks..lol
i'm removing them to experiment with tinting the amber ...

I have been searching on here for the past hr and cant find the answer so i have to ask.

How the hell do you get these buggers off?
I removed the 2 10 mil bolts and the assembly is loose but wont pull out of the fender. I know i read on here in the past that you might need to pull real hard but i ...

To quote Rain Man... "I'm an excellent driver" so i'm completely fine without all the added crap. i'm gonna put off fixing it until it is a more frequent annoyance. with well over a million miles logged over the years with no abs i only view this as an annoyance ( I hate seeing any lights or ...

thanks for all the detailed information Ken.I'm sure it will be helpful to many others as well as myself.

I know without actually inspecting the connections we cannot be sure but is it common for the abs trac light and service display to only come on at wide intervals? if it was an actual sensor ...

Have you tried resetting your memory settings?

yes i did reset and it has not happened since then but it's intermittent so i don't really know if that fixed it yet

oops.. no i did not reset memory setting. i reset the info center to clear stability notice.
refresh my memory, how do i reset the ...

always the same key and fob.

I drove a lot today turned my car off 3 different times and only one time did i have to readjust my mirrors. they get pointed down as if i was driving at night and some douche was behind me with there high beams on and i tilted them down to avoid being blinded.

side ...